Oki C9200dxn Setup Manual - Network Install: Macintosh
19
14
Network Install: Macintosh
®
□ Place the CD supplied with the printer in the
CD-ROM drive, then double-click the OKI CD icon
that appears on the desktop.
□ Open the MAC folder, then the PSDrv ® English ®
Mac Installer folders.
□ Double-click the Mac Installer icon, then click
Continue.
□ Select Custom install from the drop-down box.
□ Select the printer model you have.
□ If you wish to install the Swatch Utility (see page 11
for more information) and/or the Fonts Downloader
utility, select them, then click Install.
□ When the installation is complete, click Quit.
Network: Install the OkiNet
Software Utilities
□ Place the CD supplied with the printer in the
CD-ROM drive, then double-click the CD icon that
appears.
□ Double-click OkiNet Utility for EtherTalk.
□ In the EtherTalk
®
Zone Selection dialog box, click
Search.
The software will discover the OkiLAN 6200e print
server.
□ Click Quit, and close the OkiNet Utilities dialog box.
Network: Create the PPD
□ Activate Chooser from the Apple menu, then select
the LaserWriter
®
icon and highlight the OKI printer
model you have.
□ Click Create, then click Select PPD.
□ Highlight the PPD for the printer model you have
installed, then click Select.
□ Close Chooser.
!
For information on using the OkiNet Utilities soft-
ware, see “EtherTalk Support for Apple Macintosh”
in the OkiLAN 6200e Network User’s Guide.
Network Connection
!
Requires Mac
®
OS 7.x or above, running on a
Macintosh computer with EtherTalk interface.
The Ethernet cable is not supplied with the printer.
Use an Ethernet crossover cable with RJ45
connectors at either end.
□ Turn the printer off.
□ Connect your Ethernet cable to the network port on
the print server (
1).
□ Connect the other end of the Ethernet cable to the
network port (
2).
□ Turn the printer on and wait for the print server status
light to stop blinking.
!
For more information on the OkiLAN 6200e Print
Server, see the on-line OkiLAN 6200e User’s Guide.
Network: Install the Driver &
Software Utilities
!
Be sure to switch off antivirus software before
installing a printer driver.
□ Turn the printer on, then turn the computer on.
Network Port
Status
Light
Test Button