Oki C9300 Series Installation Instructions

C9300/C9500

2nd/3rd Tray

Installation Instructions

Tray Part Number: 41945801

58364901

P

HASE

 1:I

NSTALL

THE

A

UXILIARY

 T

RAY

(

S

)

You can install up to two auxiliary 

paper trays on the printer, or one 

Auxiliary Tray and one High 

Capacity Feeder.

Before you start, find an extra per-

son to help guide you in placing the 

printer on the pins.

1. Unpack the tray(s) and remove the 

shipping materials.

2. Turn off the printer and unplug the 

power cord.

3. Remove the interface cable.

4. Move the tray into position (paper 

tray facing front), noting the 

location of the pins (1) and 

connector (2).

5. If you are installing two trays, place 

the first tray on top of the second 

one, aligning the holes/connector in 

the bottom of the upper tray with 

pins/connector on the lower tray.

6. Grasp and lift the printer by the 

hand holds on the sides and back.

7. Lower the printer onto the auxiliary 

tray(s), aligning the printer with the 

tray(s) and lowering the holes/

connector in the bottom of the 

printer onto the pins/connector on 

the tray. (It helps to have an extra 

person to watch and guide you in 

placing the printer on the pins.)

8. Reattach the interface cable.

9. Plug the power cord in and turn on 

the printer.

10. Access the printer menu and check 

to be sure that the printer is 

recognizing the newly installed 

trays:

a. Press MENU repeatedly until 

MEDIA MENU appears on the 

display.

b. Press ITEM + repeatedly until 

you see TRAY2 MEDIATYPE 

on the display.

c. If you installed two trays, press 

ITEM + until you see TRAY3 

MEDIATYPE on the display.

d. If you do not see TRAY2 

MEDIATYPE or TRAY3 

MEDIATYPE, the printer is 

not properly attached to the 

connector on the tray(s) and 

you need to lift the printer and 

reposition it.

P

HASE

 2: L

OAD

 P

RINT

 M

EDIA

1. Pull out the tray.

a. If necessary, lift out the media 

indicator at the right end of the 

tray and reposition it to corre-

spond with the media you will 

normally use in that tray.

b. Position the paper guides in the 

tray.

Caution!

• The printer weighs 160 lbs. (72 

kg); use at least 2 people to lift 

the printer.

• Grasp the printer using the hand 

holds on the sides and on the 

back.

• Use proper lifting techniques.

Turn off the printer.