Oki C9300 Series Installation Instructions

C9300/C9500

High Capacity Feeder (HCF)

Installation Instructions

Tray Part Number: 41945901

58365001

P

HASE

 1:I

NSTALL

THE

 H

IGH

C

APACITY

 F

EEDER

 (HCF)

You can install just the HCF or one 

auxiliary tray and the HCF.

Before starting, find an extra per-

son to help guide you in placing the 

printer on the pins.

1. Unpack the HCF and remove the 

shipping materials.

2. Turn off the printer and unplug the 

power cord.

3. Remove the interface cable.

4. Move the HCF into position (paper 

tray facing front), noting the 

location of the pins (1) and 

connector (2).

5. If you are installing both the HCF 

and an auxiliary tray, place the 

auxiliary tray on top of the HCF, 

aligning the holes/connector  in the 

bottom of the tray with pins/

connector  on the HCF.

6. Grasp and lift the printer by the 

hand holds on the sides and back.

7. Lower the printer onto the HCF, 

aligning the holes/connector in the 

bottom of the printer onto the pins/

connector on the HCF (a) or tray/

HCF (b). (It helps to have a third 

person to watch and guide you in 

placing the printer on the pins.)

8. Reattach the interface cable.

9. Plug in the power cord and turn on 

the printer.

10. Access the printer menu and to 

ensure that the printer recognizes 

the newly installed options:

a. Press MENU repeatedly until 

MEDIA MENU appears on the 

display.

b. Press ITEM + repeatedly until 

you see TRAY2 MEDIATYPE 

on the display.

c. If you installed two trays, press 

ITEM + until you see TRAY3 

MEDIATYPE on the display.

d. If you do not see TRAY2 

MEDIATYPE or TRAY3 

MEDIATYPE, the printer is 

not properly attached to the 

connector on the tray(s) and 

you need to lift the printer and 

reposition it.

P

HASE

 2: L

OAD

 P

APER

1. Pull out the tray.

a. If necessary, lift out the media 

indicator at the right end of the 

tray and reposition it to corre-

spond with the media you will 

normally use in that tray.

b. Position the paper guides in the 

tray.

Caution!

• The printer weighs 160 lbs. (72 

kg); use at least 2 people to lift 

the printer.

• Grasp the printer using the hand 

holds on the sides and on the 

back.

• Use proper lifting techniques.

Turn off the printer.

a

b