Oki C9300 Series Replacement Instructions

C9300/C9500

Transfer Belt

Replacement Instructions

Transfer Belt Part Number: 41946001

58364802

Caution! The fuser unit (at the 

back of the printer) may be HOT. 

Let it cool down before attempting 

to replace the transfer belt.

1. Turn off the printer.

2. Pull up on the handle and lift the 

cover.

3. Remove the four image drums/

toner cartridges, then cover them to 

protect them from light while you 

are replacing the transfer belt.

4. Press the blue transfer belt lock 

levers (circled) to the left (toward 

the open cover).

5. Grasp both handles and, primarily 

using the big blue handle, lift the 

transfer belt unit out of the printer. 

Discard in accordance with local 

regulations.

6. Unpack the new transfer belt unit.

Caution! Be careful to avoid touch-

ing the shiny black surface of the 

transfer belt.

7. Holding the new transfer belt by the 

handles, lower it into the printer, 

carefully aligning the pins at the 

front of the belt into the slots at the 

front of the printer.

8. Using the blue handle, firmly push 

the unit into place.  If necessary, 

pull the blue lock lever (circled) 

toward the front of the printer to 

lock the transfer belt into place.

9. Replace the image drums/toner 

cartridges back into the printer, 

being careful to place them in the 

correct color position.

10. Close the cover and turn on the 

printer.