Oki OKIPAGE18n User Manual - page 110

E-110

|

OKIPAGE 18/24DX

RECEIVE BUFFER

AUTO

8KB

20KB

50KB

100KB

1MB

Notes: Sets the size of the receive buffer. If you set a large

value, the printing speed will be faster, but memory overflows

will occur more frequently.

When this value is changed, all downloaded fonts, macros,

and I/O data are lost.

ECP

ENABLE

DISABLE

Note: Enables or disables ECP mode in the parallel

interface.

OP MENU

ENABLE

DISABLE

Notes: DISABLE = Disables all control panel buttons

except ON LINE. Use this feature to prevent

changing menu items you have personally

selected.

ENABLE = All control panel buttons are

active. See Recovery Procedure below.

Recovery Procedure: To enable the operator panel after it

has been disabled:

1

Turn off the printer.

2

Follow instructions at beginning

of this section to enter the User

Maintenance Menu.

3

Under the OP MENU category,

select ENABLE.

X ADJUST

0mm (Range +2.00 to -2.00 mm, in 0.25 mm intervals)

Notes: Adjust horizontal print position in 0.25 mm

increments. Plus (+) indicates right

movement, minus (-) indicates left

movement.