Oki OKIPAGE18n User Manual - page 57
User’s Guide
E-57
|
‘’Garbage’’ prints
Reason: Incorrect driver is installed.
Solution: Install the appropriate driver (See the Quick Start
Guide)
Printer’s output is below rated speed
Reason: Delays are caused by software formatting routines
graphics downloads, and other application-specific factors.
Solution: Add RAM, reduce resolution, or set host computer’s
ECP parallel port to on. For maximum speed, output plain
text.
Size of top margin increases with each page printed
Reason: “Creeping text.” Number of lines per page in
software is not equal to number of lines per page of printer.
Solution: Many software packages assume 66 lines per page
but printer’s default is 60. Adjust software accordingly or
set LINES/PG in Menu 1 to equal lines per page in
software.
Strange symbols appear during normal printing
Reason: Wrong symbol set.
Solution: Make sure the symbol set selected corresponds to
symbol set resident, or soft font.
Hardware Problems
Certain error messages (See “Printer Messages” at the
beginning of this chapter) indicate a hardware problem. Other
possible hardware problems are listed below:
Graphic image prints partly on one page partly on the
next
Reason: Insufficient printer memory for image at set
resolution.
Solution: Change the resolution, reduce the image size, or
install more memory.