Oki OKIPAGE18n User Manual - page 90
E-90
|
OKIPAGE 18/24DX
Using the Level-1 Menu
1 Press ON LINE to place the printer off-line.
2 Press MENU 1/Menu 2 to enter the Level-1 menu.
3 Continue to press MENU 1/Menu 2 repeatedly to advance
through the Level-1 menu categories.
4 Press ENTER/Power Save to select a category.
The current default setting displays.
!
Some categories include more than one item. In such
categories, after you press ENTER, press MENU 1/
Menu 2 to advance to the next item before proceeding
to step 5.
5 Press
©/Reset repeatedly to display the selections. Stop
when you see the selection you want.
6 Press ENTER/Power Save to set a selection as the default.
An asterisk (*) appears to indicate the new default
setting.
7 Repeat steps 3 through 6 until you have made all the
menu changes you wish to make, then press ON LINE to
exit the Menu Mode and place the printer back on-line.
Notes:
!
If the MENU 1/Menu 2 button is pressed and held while
in Menu Mode, the printer cycles through the categories
in reverse order.
!
If you enter the Level-1 menu and make a selection
while there is data present in the buffer, or while a DLL/
Macro is present, the RESET TO SAVE message
appears on the display. When you press the
©
©
©
©
©/Reset
button, all data in the buffer and any temporary soft
fonts or macros will be cleared.