Oki OKIPAGE18n User Manual - page 37
User’s Guide
E-37
|
Automatic Tray Switching
To increase the paper feed capacity, you can set the printer to
automatically feed paper from the front feeder when the paper
tray empties (or from any of the optional accessories).
To do this:
1 Press ON LINE.
The printer goes off-line.
2 Press MENU 1/Menu 2 to enter the Menu Mode.
3 Press MENU 1/Menu 2 again to move to the TRAY
SELECT category.
4 Press ENTER.
5 Press MENU 1/Menu 2 twice to move to the AUTO TRAY
SWITCH item.
6 Press
©/Reset once to get to the ON selection.
7 Press ENTER to engage the ON selection.
An asterisk appears next to ON.
8 Press ON LINE to exit the Menu Mode.
!
Paper tray size settings in your application software
override the printer’s front operator panel settings.
If all paper sources have the same paper size selected, the
printer will normally feed paper in the following sequence:
(1) the first tray
(2) the paper expansion tray (if installed)
(3) the second paper expansion tray (if installed)
(4) the front feeder
(5) the multipurpose feeder (if installed).
If any paper tray has a different size paper selected, it will be
skipped.
If you wish to change the sequence, use the Maintenance
Menu (see “The User Maintenance Menu” in the Printer
Control chapter).