Oki OKIPAGE18n User Manual - page 25

User’s Guide

E-25

|

7 Send the print command from your software.

8 When prompted by the printer’s display, press the FORM

FEED button on the printer

control panel.

The printed envelope will exit at the rear.

Manual Feed: Labels

!

Sheet and label adhesive must withstand the fusing

process heat of 392

°°°°°

F (200

°°°°°

C) for 1 second.

Label adhesive must not be exposed; if it is, it will cause

jamming in the printer.

•

Labels must cover the entire carrier sheet.

•

Use rear paper exit to avoid peeling.

To print labels:

1 In your software program:

a.

Enter the printer setup menu.

b.

Select Manual Feed.

c.

Select the label sheet size.

2 Lower the rear paper exit tray and pull out the rear exit

extender.