P&E Microcomputer Systems XPC560S EVB User Manual - page 20
of
69
16
xPC560S EVB User Manual
(LIN2).
J6 – LIN1 pin2 configuration
J22 – LIN1 enable
J23 – LIN1 master selection
J24 – LIN1 pin1 configuration
Jumper Setting
Effect
On
Pin 2 of the LIN1 connector is connected to 12V
Off (default)
Pin 2 of the LIN1 connector is not connected to 12V
Jumper Setting
Effect
On (default)
Enables the LIN1 transceiver
Off
Disables the LIN1 transceiver
Jumper Setting
Effect
On
LIN1 is configured as a master node
Off (default)
LIN1 is configured as a slave node
Jumper Setting
Effect