P&E Microcomputer Systems XPC560S EVB User Manual - page 22
of
69
18
xPC560S EVB User Manual
Figure 3-4: LIN1 Schematic
J31 – LIN2 pin2 configuration
J19 – LIN2 enable
Jumper Setting
Effect
On
Pin 2 of the LIN2 connector is connected to 12V
Off (default)
Pin 2 of the LIN2 connector is not connected to 12V
Jumper Setting
Effect
On
Enables the LIN2 transceiver
Off (default)
Disables the LIN2 transceiver