P&E Microcomputer Systems XPC560S EVB User Manual - page 24
of
69
20
xPC560S EVB User Manual
J30 – LIN2/SCI RxD selection
Controls whether the RxD pin on LIN2 or SCI is connected to the default I/O
pin on the MPC560xS processor.
Figure 3-5: LIN2 schematic
Jumper Setting
Effect
1+2
The LIN2 RxD pin is connected to the “PI7” pin on
the MPC560xS processor. This should be set if
enabling LIN2.
2+3
The SCI RxD pin is connected to the “PI7” pin on the
MPC560xS processor.