P&E Microcomputer Systems XPC560S EVB User Manual - page 42
of
69
38
xPC560S EVB User Manual
J28 – Reset Pullup
The RESET signal of the MPC560xS processor can be pulled up to a logic
high voltage.
Figure 4-3: Reset circuitry schematic
On (default)
The RESET button on the xPC560S Mini‐Module is
enabled
Off
The RESET button on the xPC560S Mini‐Module is
disabled
Jumper Setting
Effect
1+2
The RESET signal on the MPC560xS processor is pulled
up to 5V
2+3
The RESET signal on the MPC560xS processor is pulled
up to 3.3V