P&E Microcomputer Systems XPC560S EVB User Manual - page 63
of
69
xPC560S EVB User Manual
59
6.4
General Configuration
J13 – Reset Enable
A RESET push button on the xPC560S Mini-Module can be used to reset the
processor.
J28 – Reset Pullup
The RESET signal of the MPC560xS processor can be pulled up to a logic
high voltage.
Jumper Setting
Effect
On (default)
The RESET button on the xPC560S Mini‐Module is
enabled
Off
The RESET button on the xPC560S Mini‐Module is
disabled
Jumper Setting
Effect
1+2
The RESET signal on the MPC560xS processor is pulled
up to 5V
2+3
The RESET signal on the MPC560xS processor is pulled
up to 3.3V