P&E Microcomputer Systems XPC560S EVB User Manual - page 58
of
69
54
xPC560S EVB User Manual
J16 – VDDR Voltage Selection
Sets the voltage level on the MPC560xS “VDD_IO_A” power pin.
J26 – VDDE_E Voltage Selection
Sets the voltage level on the MPC560xS “VDD_IO_D” power pin.
1+2 (default)
MPC560xS “VDD_IO_B”, “VDD_IO_C”, and
“VDD_IO_G” pins are powered by 5V (J14 must be
ON)
2+3
MPC560xS “VDD_IO_B”, “VDD_IO_C”, and
“VDD_IO_G” pins are powered by 3.3V (J18 must be
ON)
Jumper Setting
Effect
1+2 (default)
MPC560xS “VDD_IO_A” is powered by 5V (J14 must
be ON)
2+3
MPC560xS “VDD_IO_A” is powered by 3.3V (J18
must be ON)
Jumper Setting
Effect
1+2 (default)
MPC560xS “VDD_IO_D” is powered by 5V (J14 must
be ON)
2+3
MPC560xS “VDD_IO_D” is powered by 3.3V (J18
must be ON)