1. DL manuals
  2. Panasonic
  3. Printer
  4. DP-C266
  5. Operating Instructions Manual

Panasonic DP-C266 Operating Instructions Manual

Manual is about: Digital colour imaging system

Summary of DP-C266

  • Page 1

    Digital color imaging systems operating instructions before operating this machine, please carefully read this manual and keep this documentation in a safe place for future reference. (illustration shows optional accessories that may not be installed on your machine.) english (for copier) model no. ...

  • Page 2

    2 operating instructions the following operating instruction manuals are included with this machine. Please refer to the appropriate manual and keep all manuals for future reference. If you lose the manual, contact the authorized panasonic dealer. Accessories quick reference guide describes the basi...

  • Page 3: Icons

    3 conventions icons the following icons are used in this manual. Notation the following notations are used in this manual. Icon description indicates important information that must be read in detail. Indicates reference information. Notation description for keys and buttons hard buttons on the cont...

  • Page 4

    4 table of contents chapter 1 basic menu features placing originals.................................................................................................................. 6 how to place originals ................................................................................................

  • Page 5

    5 copying facing page original onto two separate sheets ............................... “2 page” 46 copying facing page original onto a 2-sided sheet ....................................“book -> 2” 47 copying multiple pages onto a single sheet (n in 1 copy) ................................ “n in 1” ...

  • Page 6: How To Place Originals

    6 c hap te r 1 ba sic me nu fea tur es chapter 1 basic menu features placing originals how to place originals z on the adf acceptable paper type original size: a3, b4, a4, a4-r, a5, a5-r, fls (8" x 13", 8.5" x 13"), 5.5" x 8.5" (invoice), 5.5" x 8.5" (invoice-r), 8.5" x 11" (letter), 8.5" x 11" (let...

  • Page 7: Notice For Platen Glass

    7 c hap te r 1 ba sic me nu fea tur es notice for platen glass align the original to the top left corner mark ( ). Z if the original is not positioned properly, a portion of the original may not be copied. Z for originals smaller than 5.5" x 8.5" (invoice) size, position the original within the 5.5"...

  • Page 8

    8 c hap te r 1 ba sic me nu fea tur es basic operation procedure the machine automatically detects original(s) and decides on the copy size and color mode to use. If the detection fails, manually set the settings. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key i...

  • Page 9

    9 c hap te r 1 ba sic me nu fea tur es 4 enter the desired number of copies. (up to 999) z when inputting a number (4 to 8 digits) with the optional fax communication board installed, the machine automatically interprets it as a telephone number, switches to the fax mode, and displays the number pad...

  • Page 10

    10 c hap te r 1 ba sic me nu fea tur es copying with preset ratios (reduction/ enlargement) you can easily enlarge or reduce the copy size by selecting the preset size with the copy size buttons. Z to change the assigned paper size of copy size buttons, select “paper/output tray” and modify the sett...

  • Page 11

    11 c hap te r 1 ba sic me nu fea tur es selecting the color mode you can copy in the color mode selected by the machine, or select the color mode manually. Z the default color mode settings can be changed. Refer to copier settings (key operator mode) in the operating instructions (for function param...

  • Page 12: Black Mode

    12 c hap te r 1 ba sic me nu fea tur es black mode color and monochrome originals can be copied in black and white. 1 select “black”, and then select “ok”. Z to display this screen, refer to steps 1 to 3 of selecting the color mode (see page 11). Z for the following procedure, refer to steps 5 to 6 ...

  • Page 13: 2 Color Mode

    13 c hap te r 1 ba sic me nu fea tur es 2 color mode color original can be copied in 2 colors, which can be achieved by using black and another specified color. The specified color can be selected from the basic colors (red, green, blue, yellow, magenta, and cyan) and the registered colors. Z when t...

  • Page 14

    14 c hap te r 1 ba sic me nu fea tur es 4 select “ok”. Ex: “green” is selected. Z for the following procedure, refer to steps 5 to 6 of selecting the color mode (see page 11)..

  • Page 15: 1 Color Mode

    15 c hap te r 1 ba sic me nu fea tur es 1 color mode color and monochrome originals can be copied in one specified color. The color can be selected from the basic colors (red, green, blue, yellow, magenta, and cyan) and the registered colors. Z when the 1 color mode is selected, the original type se...

  • Page 16

    16 c hap te r 1 ba sic me nu fea tur es 4 select “ok”. Ex: “green” is selected. Z for the following procedure, refer to steps 5 to 6 of selecting the color mode (see page 11)..

  • Page 17: New Color Registration

    17 c hap te r 1 ba sic me nu fea tur es new color registration 1 select “add custom”. Z to display this screen, refer to steps 1 to 2 of 2 color mode (see page 13). 2 select any button without a color name registered, and then select “ok”. When changing the registered color select the registered col...

  • Page 18

    18 c hap te r 1 ba sic me nu fea tur es 5 enter the original color name with the keyboard, and then select “ok”. Z up to 20 characters can be entered. Z for instructions on how to enter characters, refer to using the keyboard in the operating instructions (for function parameters) of provided cd-rom...

  • Page 19: Memo

    19 c hap te r 1 ba sic me nu fea tur es memo.

  • Page 20

    20 c hap te r 1 ba sic me nu fea tur es selecting original type and adjusting the density select the original type corresponding to your documents. Adjust the copy density according to your requirements. Z the original type setting selection is not available when the 2 color or 1 color mode is selec...

  • Page 21

    21 c hap te r 1 ba sic me nu fea tur es 5 adjust the density using “lighter” or “darker”, and then select “ok”. 6 enter the desired number of copies. 7 press the start key. Z after finishing copying, press the reset key to return to the initial screen of the currently active mode. Text select when c...

  • Page 22

    22 c hap te r 1 ba sic me nu fea tur es registering quality preset save your favorite quality adjustment setting by registering up to 5 quality presets. The following quality adjustment settings can be registered: • auto, black, full color, 2 color, or 1 color • original type • density more settings...

  • Page 23

    23 c hap te r 1 ba sic me nu fea tur es 6 select a quality preset button, and then select “ok”. When registering a new quality preset select an empty quality preset button. When updating a registered quality preset select the registered quality preset button. 7 enter the quality preset name, and the...

  • Page 24

    24 c hap te r 1 ba sic me nu fea tur es using quality preset you can recall the registered quality adjustment settings by the following procedures. Z for details on how to register image quality adjustment settings into quality preset, refer to registering quality preset (see page 22). 1 place origi...

  • Page 25

    25 c hap te r 1 ba sic me nu fea tur es quality adjusting image quality items can be easily set by selecting from 4 image quality types (lively, bright, warmer, and cooler). Additionally, in the custom setting selection, the following 7 image quality adjustments can be set. • background removal • bl...

  • Page 26

    26 c hap te r 1 ba sic me nu fea tur es z if “tracingpaper” is selected in “original type”, the bleedthrough prevention is set to 3 regardless of the selected image quality type. Z the default values are set upon shipment. Key operations can change these values. Refer to copier settings in the opera...

  • Page 27: Background Removal

    27 c hap te r 1 ba sic me nu fea tur es background removal the original can be copied with the background color removed. This function is useful when copying newspapers or an original with background color. Z the setting of background removal becomes invalid if “photo” is selected in “original type”...

  • Page 28: Bleedthrough Prevention

    28 c hap te r 1 ba sic me nu fea tur es bleedthrough prevention thin sheets of original can be copied without bleeding through. Z the setting of bleedthrough prevention becomes invalid if “photo” is selected in “original type”. Z when setting the tint adjustment to more blue or more red, the copies ...

  • Page 29: Tint

    29 c hap te r 1 ba sic me nu fea tur es tint the original can be copied with reddish or bluish color accentuated. 1 select “tint”. Z to display this screen, refer to step 1 of background removal (see page 27). 2 adjust the color tone with “more red” or “more blue”, and then select “ok”. Z the screen...

  • Page 30: Contrast

    30 c hap te r 1 ba sic me nu fea tur es contrast the original can be copied with the adjusted contrast. 1 select “contrast”. Z to display this screen, refer to step 1 of background removal (see page 27). 2 adjust the contrast with “lower” or “higher”, and then select “ok”. Z the screen will return t...

  • Page 31: Sharpness

    31 c hap te r 1 ba sic me nu fea tur es sharpness the original can be copied by softening or sharpening the outline of the image. 1 select “sharpness”. Z to display this screen, refer to step 1 of background removal (see page 27). 2 adjust the sharpness with “lower” or “higher”, and then select “ok”...

  • Page 32: Saturation

    32 c hap te r 1 ba sic me nu fea tur es saturation the original can be copied with the adjusted saturation. 1 select “saturation”. Z to display this screen, refer to step 1 of background removal (see page 27). 2 adjust the saturation with “lower” or “higher”, and then select “ok”. Z the screen will ...

  • Page 33: Color Balance

    33 c hap te r 1 ba sic me nu fea tur es color balance the original can be copied with the adjusted density level (darker, medium, and lighter) of yellow, magenta, cyan, and black. Z the density of each color can be fine tuned for each of the three density levels. This function is useful for the fine...

  • Page 34

    34 c hap te r 1 ba sic me nu fea tur es proof copying when making more than one copy, the first copy can be printed as a proof copy. After confirming its quality, the remaining copies can be printed. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the machine ...

  • Page 35

    35 c hap te r 1 ba sic me nu fea tur es confirming/editing the selected copy features before copying, the settings of “more menus” can be checked, changed, and deleted. 1 select “confirm settings”. 2 check the settings, and then select “close”. Z if “confirm settings” is selected, the setting screen...

  • Page 36

    36 c hap te r 1 ba sic me nu fea tur es storing a job in memory a copy job can be registered as a preset job. It is useful to register the frequently used settings as preset jobs. Z refer to recalling a preset job stored in memory (see page 37). Z once registered, the copy job settings are kept in t...

  • Page 37

    37 c hap te r 1 ba sic me nu fea tur es recalling a preset job stored in memory the specific copy job will be done by recalling the registered preset jobs. Z refer to storing a job in memory (see page 36). 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the ma...

  • Page 38

    38 c hap te r 1 ba sic me nu fea tur es checking the waiting to copy job a list of jobs currently being printed or waiting to print can be displayed. The following types of jobs can be displayed. • all jobs • copy jobs waiting to print jobs can be deleted. Displaying a list of all jobs a list of all...

  • Page 39: Deleting Copy Jobs

    39 c hap te r 1 ba sic me nu fea tur es deleting copy jobs the jobs in the ready status can be deleted. 1 select “copy” in the output queue screen. Z to display the output queue screen, refer to checking the waiting to copy job (see page 38). 2 select a job, and then select “delete”. Z when deleting...

  • Page 40

    40 c hap te r 1 ba sic me nu fea tur es completion notice if the completion notice is set, you will be notified on your computer when copying is completed. Z before using this function, install the panasonic document management system and printer driver, and then configure each software. Z to regist...

  • Page 41: Memo

    41 c hap te r 1 ba sic me nu fea tur es memo.

  • Page 42

    42 c hap te r 2 mo re m e nu s f eat ur es chapter 2 more menus features 2-sided copy mode z the standard setting of “2-sided / original->copy” can be changed. Refer to copier settings in the operating instructions (for function parameters) of provided cd-rom. Z special papers such as cardboard cann...

  • Page 43

    43 c hap te r 2 mo re m e nu s f eat ur es copying 1-sided originals onto 2-sided sheets two 1-sided originals can be copied onto one 2-sided sheet. The 1st original’s image is copied onto the front side and the 2nd original’s image is copied onto the back side of the sheet. 1 select “2-sided / orig...

  • Page 44

    44 c hap te r 2 mo re m e nu s f eat ur es copying 2-sided original(s) onto two separate sheets 2-sided original(s) can be copied as separated into two 1-sided pages. 1 select “2-sided / original->copy”, and then select “2 -> 1”. Z to display this screen, refer to steps 1 to 3 of basic operation for...

  • Page 45

    45 c hap te r 2 mo re m e nu s f eat ur es copying 2-sided original onto 2-sided sheet 2-sided original can be copied onto 2-sided sheet (same as the original). 1 select “2-sided / original->copy”, and then select “2 -> 2”. Z to display this screen, refer to steps 1 to 3 of basic operation for the 2...

  • Page 46

    46 c hap te r 2 mo re m e nu s f eat ur es copying facing page original onto two separate sheets facing pages or a 11” x 17” size original can be copied as separated into two 1-sided sheets. 1 select “2-sided / original->copy”, and then select “2 page”. Z to display this screen, refer to steps 1 to ...

  • Page 47

    47 c hap te r 2 mo re m e nu s f eat ur es copying facing page original onto a 2-sided sheet facing pages or an 11" x 17" size original can be copied as separated into one 2-sided sheet. 1 select “2-sided / original->copy”, and then select “book -> 2”. Z to display this screen, refer to steps 1 to 3...

  • Page 48

    48 c hap te r 2 mo re m e nu s f eat ur es 5 select the copy format, and then select “ok”. Z for the following procedure, refer to steps 5 to 6 of basic operation for the 2-sided copy mode (see page 42). The first through last page are copied. The first page and beyond are copied, but the last page ...

  • Page 49

    49 c hap te r 2 mo re m e nu s f eat ur es copying multiple pages onto a single sheet (n in 1 copy) multiple pages (2, 4 or 6 sheets) can be copied onto a single sheet. The images of originals are reduced to fit into the size of the copy paper. 1 select “2-sided / original->copy”, and then select “n...

  • Page 50

    50 c hap te r 2 mo re m e nu s f eat ur es 3 select the orientation of the original. 4 select the desired copy mode. When 1 -> 2, 2 -> 1 or 2 -> 2 is selected select the bind position of the original, and then select “ok”. Ex: when 1 -> 2 is selected for “2 in 1” when 2 -> 2 is selected, select the ...

  • Page 51

    51 c hap te r 2 mo re m e nu s f eat ur es 5 select the layout format, and then select “ok”. When 2 in 1 is selected when 4 in 1 is selected when 6 in 1 is selected z for the following procedure, refer to steps 5 to 6 of basic operation for the 2-sided copy mode (see page 42)..

  • Page 52

    52 c hap te r 2 mo re m e nu s f eat ur es copying originals with saddle-stitch binding (booklet) z originals should be placed on the adf. (5.5" x 8.5" or 8.5" x 11" size is only available, up to 60 originals) z saddle-stitch binding is possible only when the optional 1bin saddle-stitch finisher (da...

  • Page 53

    53 c hap te r 2 mo re m e nu s f eat ur es when “2 sided” is selected select the bind position of the original, and then select “ok”. 3 select the bind position for the copy. 4 select the cover page type if necessary. Select “cover”. Select the cover type. Z when “blank” is selected for the cover ty...

  • Page 54

    54 c hap te r 2 mo re m e nu s f eat ur es 5 select “ok” to exit the cover settings. 6 select “ok”. Z for the following procedure, refer to steps 5 to 6 of basic operation for the 2-sided copy mode (see page 42). Z when the fold position does not match with the center position of the copies, set the...

  • Page 55

    55 c hap te r 2 mo re m e nu s f eat ur es copying mixed size originals from the adf use this function when copying mixed size originals (8.5" x 11" and 11" x 17", or 5.5" x 8.5", 8.5" x 11"-r, and 8.5" x 14" (legal)). Using the adf, original size can be detected automatically and copied in the same...

  • Page 56

    56 c hap te r 2 mo re m e nu s f eat ur es 3 select the desired copy mode, and then select “ok”. When 1 -> 2, 2 -> 1 or 2 -> 2 is selected select the orientation of the original. Select the bind position of the original, and then select “ok”. Ex: when 1 ->2 is selected when all originals are vertica...

  • Page 57

    57 c hap te r 2 mo re m e nu s f eat ur es when 2 ->2 is selected , select “change” and select the bind position for the copy, and then select “ok”. 4 when copying the same paper size, select “basic menu”, and then select a desired copy size with the copy size buttons. Z for the following procedure,...

  • Page 58

    58 c hap te r 2 mo re m e nu s f eat ur es copying special originals (thin paper, etc.) from the adf sadf this mode adds a 5-second delay to allow another original to be placed on the adf. Special originals (thin paper, etc.) can be fed from the adf and copied continuously using the sadf mode. 1 pla...

  • Page 59

    59 c hap te r 2 mo re m e nu s f eat ur es job build this is useful for copying multiple sets of originals that exceed the maximum capacity of the adf of 100 sheets (20 lb/letter). (see the example below.) ex: to make 5 sets of sorted copies of 115-sheet of originals. (a) place the first 100 sheets ...

  • Page 60

    60 c hap te r 2 mo re m e nu s f eat ur es sort mode the original can be copied, printed, and sorted in a specified number of sets. The following finishing modes are available when the optional finisher and punch unit are installed. Z only 8.5" x 11" (letter/letter-r) size is applicable for “rotate-...

  • Page 61

    61 c hap te r 2 mo re m e nu s f eat ur es 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the machine is set to other function mode. 3 select “more menus”. 4 select “sort / finish”, and then select a sort mode. When optional finisher is not installed when the...

  • Page 62

    62 c hap te r 2 mo re m e nu s f eat ur es when the optional 1bin finisher is installed z when “staple-sort” is selected, refer to the following. Select the orientation of the original, and then the staple position. 5 enter the desired number of copies. 6 press the start key. Z when copying from the...

  • Page 63: Memo

    63 c hap te r 2 mo re m e nu s f eat ur es memo.

  • Page 64: Variable Ratios

    64 c hap te r 2 mo re m e nu s f eat ur es zoom mode variable ratios the original can be copied by setting the enlargement/reduction ratio. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the machine is set to other function mode. 3 select “more menus”. 4 sele...

  • Page 65

    65 c hap te r 2 mo re m e nu s f eat ur es 6 enter the zoom ratio with “s” and “t”, or the keypad, and then select “ok”. Z the ratio can be set in 1% increments from 25% to 400%. Z when changing the paper size after setting the zoom ratio, select “basic menu”, and select “paper/output tray”, and the...

  • Page 66: Auto Zoom

    66 c hap te r 2 mo re m e nu s f eat ur es auto zoom by setting auto zoom, originals can be automatically enlarged/reduced to fit the size of the loaded paper. Z this function can be selected when the original is placed on the platen glass. Z as the original is placed on the platen glass, the positi...

  • Page 67

    67 c hap te r 2 mo re m e nu s f eat ur es 5 select the desired zoom type ratio, and then select “ok”. 6 select the desired size of paper, and then select “ok”. 7 enter the desired number of copies. 8 press the start key. Z when copying from the platen glass, place the next original, and follow the ...

  • Page 68: Setting A Blank Edge

    68 c hap te r 2 mo re m e nu s f eat ur es effect modes setting a blank edge unnecessary edge can be erased by setting a blank edge. Z when “zoom” is selected, the erasing width varies depending on the zoom ratio. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key i...

  • Page 69

    69 c hap te r 2 mo re m e nu s f eat ur es 6 enter the erasing width with “s” and “t”, or the keypad, and then select “ok”. Z the erasing width can be set in 1 mm increments from 5 mm to 99 mm. 7 enter the desired number of copies. 8 press the start key. Z when copying from the platen glass, place t...

  • Page 70

    70 c hap te r 2 mo re m e nu s f eat ur es eliminating dark inner binding shadows when copying original such as the center of folding position may be shaded, the shade can be easily eliminated. Z when “zoom” is selected, the erasing width varies depending on the zoom ratio. Z when “overlay” or “form...

  • Page 71

    71 c hap te r 2 mo re m e nu s f eat ur es shifting image to right, left, up, or down the margin can be added on any 4 sides of the image with the image shifted to the right, left, up, or down accordingly. Z if a part of the copied image is missing, change the margin reduction setting to “yes”. Refe...

  • Page 72

    72 c hap te r 2 mo re m e nu s f eat ur es 5 select the desired position of the binding margin. 6 enter the width of the binding margin with “s” and “t”, or the keypad, and then select “ok”. Z the width of the binding margin can be set in 1 mm increments from 5 mm to 99 mm. 7 enter the desired numbe...

  • Page 73: Copying Mirror Image

    73 c hap te r 2 mo re m e nu s f eat ur es copying mirror image the laterally reversed image of original can be copied. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the machine is set to other function mode. 3 select “more menus”. 4 select “zoom / effects”,...

  • Page 74: Copying With Stamping

    74 c hap te r 2 mo re m e nu s f eat ur es copying with stamping page number or date, etc. Can be stamped on each sheet. Z this function can be selected when the original is placed on the adf. Z only one kind of stamp can be selected from page number, issue number, date, and text / number for each s...

  • Page 75

    75 c hap te r 2 mo re m e nu s f eat ur es page number the original can be copied with page numbers printed. Z the default is -n- (number) format. To change to n/m (number/maximum) format, refer to copier settings in the operating instructions (for function parameters) of provided cd-rom. Z make sur...

  • Page 76

    76 c hap te r 2 mo re m e nu s f eat ur es 5 if “change” was selected in step 4, select the starting page. 6 if “change” was selected in step 4, enter the starting number with “s” and “t”, or the keypad, and then select “ok”. Z starting page number can be set from 1 to 999. 7 select “ok”. Z for the ...

  • Page 77

    77 c hap te r 2 mo re m e nu s f eat ur es issue number the original can be copied with consecutive numbers from 001 to 999 printed. Z the issue numbers can be set from 001 to 999. After 999, the number returns to 001. 1 select “issue number”. Z to display this screen, refer to steps 1 to 4 of basic...

  • Page 78

    78 c hap te r 2 mo re m e nu s f eat ur es 4 enter the starting number with “s” and “t”, or the keypad, and then select “ok”. Z for the following steps, refer to steps 5 to 6 in the basic operation for stamping (see page 74). Each time it is selected, the number increments by 1. Each time it is sele...

  • Page 79

    79 c hap te r 2 mo re m e nu s f eat ur es date the original can be copied with a date printed. The date is printed in the mm/dd/yyyy format. 1 select “date”. Z to display this screen, refer to steps 1 to 4 of basic operation for stamping (see page 74). 2 select the orientation of the original. 3 se...

  • Page 80

    80 c hap te r 2 mo re m e nu s f eat ur es move the cursor to the desired position using and . Change the date with the keypad. 5 select “ok”. Z for the following steps, refer to steps 5 to 6 in the basic operation for stamping (see page 74)..

  • Page 81

    81 c hap te r 2 mo re m e nu s f eat ur es text / number the original can be copied with text and page/issue numbers printed. Z page numbers are printed in -n- (number) format. Z page and issue numbers can be entered from 001 to 999. After 999, the number returns to 001. Z up to 32 characters, inclu...

  • Page 82

    82 c hap te r 2 mo re m e nu s f eat ur es 5 enter text, and then select “ok”. Z up to 32 characters can be entered. Z for instructions on how to enter characters, refer to using the keyboard in the operating instructions (for function parameters) of provided cd-rom. 6 select “page” or “issue”. 7 en...

  • Page 83: Centering

    83 c hap te r 2 mo re m e nu s f eat ur es centering the copying image can be centered automatically on a selected paper. Z this function can be selected when the original is placed on the platen glass. Z as the original is placed on the platen glass, the position of the original may be erroneously ...

  • Page 84: Image Repeat

    84 c hap te r 2 mo re m e nu s f eat ur es image repeat create multiple images on a sheet from a single original. Z dotted lines can be printed between each of the copied images. Refer to copier settings in the operating instructions (for function parameters) of provided cd-rom. Z this function can ...

  • Page 85: Copying Inverse Image

    85 c hap te r 2 mo re m e nu s f eat ur es copying inverse image the tonal inversion of image can be copied in black and white. Z this function is only available when “black” is selected in the color mode. If the “inverse” is selected when the other color mode has been set, a message appears prompti...

  • Page 86

    86 c hap te r 2 mo re m e nu s f eat ur es insertion modes adding a cover page to copies the original can be copied using other types of paper for a cover page. Only the front cover, or front and back covers can be selected. 1 place original(s) on the adf. Z refer to placing originals (see page 6). ...

  • Page 87

    87 c hap te r 2 mo re m e nu s f eat ur es 5 select the front, or front and back covers. 6 select “cover” until the desired paper tray is displayed. Z when changing paper for copies other than the cover page, select “copy”, and change the paper tray. Z when using color or special paper for the cover...

  • Page 88

    88 c hap te r 2 mo re m e nu s f eat ur es inserting blank/copied pages between copies the original can be copied by inserting other types of paper between specified pages. You can copy specified pages (including the cover page) on paper such as colored paper set in a paper tray or on the sheet bypa...

  • Page 89

    89 c hap te r 2 mo re m e nu s f eat ur es 7 select “ok”. 8 enter the page numbers with keypad where the insertion pages are placed. Z to erase an entered number, press the clear key. 9 select to enter the following page numbers where the insertion pages are placed. Z by selecting and , move the cur...

  • Page 90

    90 c hap te r 2 mo re m e nu s f eat ur es inserting blank pages between transparency films 1 place original(s) on the adf. Z refer to placing originals (see page 6). 2 press the copy key if the machine is set to other function mode. 3 select “more menus”. 4 place the transparency films on the sheet...

  • Page 91: Memo

    91 c hap te r 2 mo re m e nu s f eat ur es memo.

  • Page 92

    92 c hap te r 2 mo re m e nu s f eat ur es overlay modes overlaying an image onto the copies the original can be overlaid with the first page of the original. The first page is called the overlay original, and the second page onwards are called the scanned original, respectively. Z the size availabl...

  • Page 93

    93 c hap te r 2 mo re m e nu s f eat ur es 5 select colors for the overlay original from the basic colors or registered custom colors, and then select “ok”. When selecting from the basic colors when selecting from the registered custom colors z if “add custom” is selected, the add custom screen is d...

  • Page 94

    94 c hap te r 2 mo re m e nu s f eat ur es 11 if “yes” was selected in step 10, select a desired button with no names registered, and then select “ok”. 12 enter the button name with keyboard, and then select “ok”. Z up to 20 characters can be entered. Z for instructions on how to enter characters, r...

  • Page 95

    95 c hap te r 2 mo re m e nu s f eat ur es overlay copying with registered image overlay an image stored in memory onto the copy. Z to use this function, overlay forms must be registered in advance. For instructions on registering overlay forms, refer to file edit (see page 97). Z available size is ...

  • Page 96

    96 c hap te r 2 mo re m e nu s f eat ur es 5 select the registered form, and then select “ok”. Z for the details about how to register the form, refer to save (see page 97). 6 select the overlay position, and then select “ok”. 7 enter the desired number of copies. 8 press the start key. Z when copyi...

  • Page 97: File Edit

    97 c hap te r 2 mo re m e nu s f eat ur es file edit up to 12 settings can be registered for the overlay form. Z refer to overlay copying with registered image (see page 95). Save z the size of the original, which can be registered in the form, is 8.5" x 11". Z after the registration, the form trans...

  • Page 98

    98 c hap te r 2 mo re m e nu s f eat ur es 6 select “save”, and then select “ok”. 7 select colors for the form from the basic colors or registered custom colors, and then select “ok”. When selecting from the basic colors when selecting from the registered custom colors z if “add custom” is selected,...

  • Page 99

    99 c hap te r 2 mo re m e nu s f eat ur es 11 enter the file name, and then select “ok”. Z up to 20 characters can be entered. Z for instructions on how to enter characters, refer to using the keyboard in the operating instructions (for function parameters) of provided cd-rom. Z after completing the...

  • Page 100

    100 c hap te r 2 mo re m e nu s f eat ur es erase 1 select the file name to be deleted. Z to display the file edit screen, refer to steps 2 to 4 in save (see page 97). 2 select “erase”, and then select “ok”. 3 select “yes”. Z after completing the deletion of the file, press the reset key to return t...

  • Page 101: Double Exposure

    101 c hap te r 2 mo re m e nu s f eat ur es double exposure both sides (front and back) of a 2-sided original can be copied onto one side of a sheet. Front side of the original is copied at the top of the page, and the back side at the bottom. Z this function is only available when copying a 2-sided...

  • Page 102

    102 c hap te r 2 mo re m e nu s f eat ur es 7 select “yes” to copy the back side of the original. Z the message is different according to the sort mode. For non sort: “another original?” is displayed. Select “yes”. For sort: “last original?” is displayed. Select “no”. 8 place the back side of the or...

  • Page 103: Memo

    103 c hap te r 2 mo re m e nu s f eat ur es memo.

  • Page 104: Digital Skyshot Mode

    104 chap te r 3 oth er fea tur es chapter 3 other features making copies with the adf opened the original can be copied without generating dark borders even if the adf is opened. Digital skyshot mode the digital skyshot mode can be selected in the standard settings. Z when “2 page” or “n in 1” is se...

  • Page 105: Manual Skyshot Mode

    105 chap te r 3 oth er fea tur es manual skyshot mode the original can be copied with the pre-registered scan size in memory. Z before using the manual skyshot mode, set m1 or m2 in the preset jobs. Refer to copier settings in the operating instructions (for function parameters) of provided cd-rom. ...

  • Page 106

    106 chap te r 3 oth er fea tur es reserving the next copy job while the current copy job is progressing the next copy job can be reserved while the current copy job is under way. Z the previous copy job settings can be saved if the function parameter “41 reserve a job settings” (copier settings > ke...

  • Page 107

    107 chap te r 3 oth er fea tur es interrupting the current copy jobs to make an urgent copy you can interrupt the current copy jobs and make an urgent copy. Z when scanning the current copy job, other copy jobs cannot be interrupted. 1 press the interrupt key while copying. Z the machine does not ac...

  • Page 108

    108 c hap te r 4 ap pen di x chapter 4 appendix combined copy functions 1 - > 2 2 - > 1 2 - > 2 2 p ag e b ook -> 2 n in 1 b ook le t m u lt i- s iz e f ee d j o b bu ild & s adf so rt n on s o rt s h ift- s o rt s h ift- g ro u p r o ta te -s or t r o ta te -gr o u p st ap le -s o rt pu n c h zoom ...

  • Page 109

    109 c hap te r 4 ap pen di x e dge bo o k marg in mirr o r st a m p in g ce n te rin g im ag e r ep eat in ver se c o ver p ag e in se rt io n tr an sp ar en cy i nt er leav in g ov er la y fo rm o ve rl ay d igi ta l s k ys hot man u al s kysh o t co m p le ti o n no ti ce in te rr u p t p roof c o...

  • Page 110

    110 c hap te r 4 ap pen di x index symbols “m1:”/“m2:” ..................................................................... 36 numerics 1 -> 1 .............................................................................. 42 1 -> 2 .............................................................. 43, ...

  • Page 111

    111 c hap te r 4 ap pen di x o original guides .................................................................6 original orientation ..........................................................7 original size .....................................................................6 original type .........

  • Page 112: Usa Only

    For service, call: usa only warranty panasonic communications company of north america makes no warranties, guarantees or representations, expressed or implied, to customer with respect to this panasonic machine, including but not limited to, any implied warranty of merchantability or fitness for a ...