1. DL manuals
  2. Panasonic
  3. Printer
  4. DP-C266
  5. Operating Instructions Manual

Panasonic DP-C266 Operating Instructions Manual

Manual is about: Digital colour imaging system

Summary of DP-C266

  • Page 1

    Operating instructions before operating this machine, please carefully read this manual and keep this documentation in a safe place for future reference. (illustration shows optional accessories that may not be installed on your machine.) english digital colour imaging systems (for copier) model no....

  • Page 2

    2 operating instructions the following operating instruction manuals are included with this machine. Please refer to the appropriate manual and keep all manuals for future reference. If you lose the manual, contact the authorised panasonic dealer. Accessories quick reference guide describes the basi...

  • Page 3: Icons

    3 conventions icons the following icons are used in this manual. Notation the following notations are used in this manual. Icon description indicates important information that must be read in detail. Indicates reference information. Notation description for keys and buttons hard buttons on the cont...

  • Page 4

    4 table of contents chapter 1 basic menu features placing originals.................................................................................................................. 6 how to place originals.................................................................................................

  • Page 5

    5 copying 2-sided original onto 2-sided sheet......................................................“ 2 -> 2 ” 46 copying facing page original onto two separate sheets ............................... “ 2 page ” 47 copying facing page original onto a 2-sided sheet ....................................“...

  • Page 6: How To Place Originals

    6 chapter 1 basic menu features 1basic menu features placing originals how to place originals on the adf acceptable paper type notice for adf do not use the following type / flawed originals. • drawing papers, transparencies, labeling paper, heavy weight papers, thin art papers, film, thermal papers...

  • Page 7

    7 chapter 1 basic menu features on the platen glass ex: book original ( “book -> 2” mode) when copying a4 sized book ex: sheet original face down. Align the centre of the book with the “a4” indication. Face down. Align with top left corner..

  • Page 8: Caution

    8 chapter 1 basic menu features notice for platen glass align the original to the top left corner mark ( ). • if the original is not positioned properly, a portion of the original may not be copied. • for originals smaller than a5 size, position the original within the a5 area and select a5. Origina...

  • Page 9

    Chapter 1 basic menu features 9 basic operation procedure the machine automatically detects original(s) and decides on the copy size and colour mode to use. If the detection fails, manually set the settings. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the ...

  • Page 10

    Chapter 1 basic menu features 10 4 enter the desired number of copies. (up to 999) z when inputting a number (4 to 8 digits) with the optional fax communication board installed, the machine automatically interprets it as a telephone number, switches to the fax mode, and displays the number pad scree...

  • Page 11

    Chapter 1 basic menu features 11 copying with preset ratios (reduction/ enlargement) you can easily enlarge or reduce the copy size by selecting the preset size with the copy size buttons. Z to change the assigned paper size of copy size buttons, select “ paper/output tray ” and modify the settings....

  • Page 12

    Chapter 1 basic menu features 12 selecting the colour mode you can copy in the colour mode selected by the machine, or select the colour mode manually. Z the default colour mode settings can be changed. Refer to copier settings (key operator mode) in the operating instructions (for function paramete...

  • Page 13

    Chapter 1 basic menu features 13 5 enter the desired number of copies. 6 press the start key. Z after finishing copying, press the reset key to return to the initial screen of the current active mode..

  • Page 14: Black Mode

    Chapter 1 basic menu features 14 black mode colour and monochrome originals can be copied in black and white. 1 select “ black ”, and then select “ ok ”. Z to display this screen, refer to steps 1 to 3 of selecting the colour mode (see page 12). Z for the following procedure, refer to steps 5 to 6 o...

  • Page 15: 2 Colour Mode

    Chapter 1 basic menu features 15 2 colour mode colour original can be copied in 2 colours, which can be achieved by using black and another specified colour. The specified colour can be selected from the basic colours (red, green, blue, yellow, magenta, and cyan) and the registered colours. Z when t...

  • Page 16

    Chapter 1 basic menu features 16 4 select “ ok ”. Ex: “ green ” is selected. Z for the following procedure, refer to steps 5 to 6 of selecting the colour mode (see page 12)..

  • Page 17: 1 Colour Mode

    Chapter 1 basic menu features 17 1 colour mode colour and monochrome originals can be copied in one specified colour. The colour can be selected from the basic colours (red, green, blue, yellow, magenta, and cyan) and the registered colours. Z when the 1 colour mode is selected, the original type se...

  • Page 18

    Chapter 1 basic menu features 18 when selecting a colour from the custom colours z when registering a custom colour, refer to new colour registration (see page 19). 4 select “ ok ”. Ex: “ green ” is selected. Z for the following procedure, refer to steps 5 to 6 of selecting the colour mode (see page...

  • Page 19: New Colour Registration

    Chapter 1 basic menu features 19 new colour registration 1 select “ add custom ”. Z to display this screen, refer to steps 1 to 2 of 2 colour mode (see page 15). 2 select any button without a colour name registered, and then select “ ok ”. When changing the registered colour select the registered co...

  • Page 20

    Chapter 1 basic menu features 20 5 enter the original colour name with the keyboard, and then select “ ok ”. Z up to 20 characters. Z for instructions on how to enter characters, refer to using the keyboard in the operating instructions (for function parameters) of provided cd-rom. 6 confirm the reg...

  • Page 21

    Chapter 1 basic menu features 21 selecting original type and adjusting the density select the original type corresponding to your documents. Adjust the copy density according to your requirements. Z the original type setting selection is not available when the 2 colour or 1 colour mode is selected. ...

  • Page 22

    Chapter 1 basic menu features 22 4 select the original type. 5 adjust the density using “ lighter ” or “ darker ”, and then select “ ok ”. 6 enter the desired number of copies. 7 press the start key. Z after finishing copying, press the reset key to return to the initial screen of the current active...

  • Page 23

    Chapter 1 basic menu features 23 registering quality preset save your favourite quality adjustment setting by registering up to 5 quality presets. The following quality adjustment settings can be registered: • auto, black, full colour, 2 colour, or 1 colour • original type • density more settings • ...

  • Page 24

    Chapter 1 basic menu features 24 6 select a quality preset button, and then select “ ok ”. When registering a new quality preset select an empty quality preset button when updating a registered quality preset select the registered quality preset button. 7 enter the quality preset name, and then sele...

  • Page 25

    Chapter 1 basic menu features 25 using quality preset you can recall the registered quality adjustment settings by the following procedures. Z for details on how to register image quality adjustment settings into quality preset, refer to registering quality preset (see page 23). 1 place original(s)....

  • Page 26

    Chapter 1 basic menu features 26 quality adjusting image quality items can be easily set by selecting from 4 image quality types (vivid, bright, warmer, and cooler). Additionally, in the custom setting selection, the following 7 image quality adjustments can be set. • background removal • bleed-thro...

  • Page 27

    Chapter 1 basic menu features 27 4 select “ more settings ”. 5 select an image quality type, and then select “ ok ”. Z if “ tracingpaper ” is selected in “ original type ”, the bleed-through prevention is set to 3 regardless of the selected image quality type. Z the default values are set upon shipm...

  • Page 28: Background Removal

    Chapter 1 basic menu features 28 background removal the original can be copied with the background colour removed. This function is useful when copying newspapers or an original with background colour. Z the settings of background removal become invalid if “ photo ” is selected in “ original type ”....

  • Page 29: Bleed-Through Prevention

    Chapter 1 basic menu features 29 bleed-through prevention thin sheets of original can be copied without bleeding through. Z the setting of bleed-through prevention becomes invalid if “ photo ” is selected in “ original type ”. Z when setting the tint adjustment to more blue or more red, the copies m...

  • Page 30: Tint

    Chapter 1 basic menu features 30 tint the original can be copied with reddish or bluish colour accentuated. Reddish colour accentuated bluish colour accentuated 1 select “ tint ”. Z to display this screen, refer to step 1 of background removal (see page 28). 2 adjust the colour tone with “ more red ...

  • Page 31: Contrast

    Chapter 1 basic menu features 31 contrast the original can be copied with the adjusted contrast. Higher lower 1 select “ contrast ”. Z to display this screen, refer to step 1 of background removal (see page 28). 2 adjust the contrast with “ lower ” or “ higher ”, and then select “ ok ”. Z the screen...

  • Page 32: Sharpness

    Chapter 1 basic menu features 32 sharpness the original can be copied by softening or sharpening the outline of the image. Lower higher 1 select “ sharpness ”. Z to display this screen, refer to step 1 of background removal (see page 28). 2 adjust the sharpness with “ lower ” or “ higher ”, and then...

  • Page 33: Saturation

    Chapter 1 basic menu features 33 saturation the original can be copied with the adjusted saturation. Lower higher 1 select “ saturation ”. Z to display this screen, refer to step 1 of background removal (see page 28). 2 adjust the saturation with “ lower ” or “ higher ”, and then select “ ok ”. Z th...

  • Page 34: Colour Balance

    Chapter 1 basic menu features 34 colour balance the original can be copied with the adjusted density level (darker, medium, and lighter) of yellow, magenta, cyan, and black. Z the density of each colour can be fine tuned for each of the three density levels. This function is useful for the fine adju...

  • Page 35

    Chapter 1 basic menu features 35 proof copying when making more than one copy, the first copy can be printed as a proof copy. After confirming its quality, the remaining copies can be printed. One copy as a proof copy the remaining copies are made after confirmation. 1 place original(s). Z refer to ...

  • Page 36

    Chapter 1 basic menu features 36 confirming/editing the selected copy features before copying, the settings of “ more menus ” can be checked, changed, and deleted. 1 select “ confirm settings ”. 2 check the settings, and then select “ close ”. Z if “ confirm settings ” is selected, the setting scree...

  • Page 37

    Chapter 1 basic menu features 37 storing a job in memory a copy job can be registered as a preset job. It is useful to register the frequently used settings as preset jobs. Z refer to recalling a preset job stored in memory (see page 39). Z once registered, the copy job settings are kept in the job ...

  • Page 38

    Chapter 1 basic menu features 38 7 enter a job name, and then select “ ok ”. Z up to 20 characters. Z for instructions on how to enter characters, refer to using the keyboard in the operating instructions (for function parameters) of provided cd-rom. Z after completing the editing of the job name, p...

  • Page 39

    Chapter 1 basic menu features 39 recalling a preset job stored in memory the specific copy job will be done by recalling the registered preset jobs. Z refer to storing a job in memory (see page 37). 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the machine i...

  • Page 40

    Chapter 1 basic menu features 40 checking the waiting to copy job a list of jobs currently being printed or waiting to print can be displayed. The following types of jobs can be displayed. • all jobs • copy jobs waiting to print jobs can be deleted. Displaying a list of all jobs a list of all the jo...

  • Page 41: Deleting Copy Jobs

    Chapter 1 basic menu features 41 deleting copy jobs the jobs in the ready status can be deleted. 1 select “ copy ” in the output queue screen. Z to display the output queue screen, refer to checking the waiting to copy job (see page 40). 2 select a job, and then select “ delete ”. Z when deleting al...

  • Page 42

    Chapter 1 basic menu features 42 completion notice if the completion notice is set, you will be notified on your computer when copying is completed. Z before using this function, install the panasonic document management system and pcl printer driver , and then configure each software. Z to register...

  • Page 43

    Chapter 2 more menus features 43 2more menus features 2-sided copy mode z the standard setting of “ 2-sided / original->copy ” can be changed. Refer to copier settings in the operating instructions (for function parameters) of provided cd-rom. Z special papers such as cardboard cannot be used for th...

  • Page 44

    Chapter 2 more menus features 44 copying 1-sided originals onto 2-sided sheets two 1-sided originals can be copied onto one 2-sided sheet. The 1st original’s image is copied onto the front side and the 2nd original’s image is copied onto the back side of the sheet. 1 select “ 2-sided / original->cop...

  • Page 45

    Chapter 2 more menus features 45 copying 2-sided original(s) onto two separate sheets 2-sided original(s) can be copied as separated into two 1-sided pages. 1 select “ 2-sided / original->copy ”, and then select “ 2 -> 1 ”. Z to display this screen, refer to steps 1 to 3 of basic operation for the 2...

  • Page 46

    Chapter 2 more menus features 46 copying 2-sided original onto 2-sided sheet 2-sided original can be copied onto 2-sided sheet (same as the original). 1 select “ 2-sided / original->copy ”, and then select “ 2 -> 2 ”. Z to display this screen, refer to steps 1 to 3 of basic operation for the 2-sided...

  • Page 47

    Chapter 2 more menus features 47 copying facing page original onto two separate sheets two facing pages or an a3 size original can be copied as separated into two 1-sided sheets. 1 select “ 2-sided / original->copy ”, and then select “ 2 page ”. Z to display this screen, refer to steps 1 to 3 of bas...

  • Page 48

    Chapter 2 more menus features 48 copying facing page original onto a 2-sided sheet facing pages or an a3 size original can be copied as separated into one 2-sided sheet. 1st page 2nd page 1st page 2nd page 1 select “ 2-sided / original->copy ”, and then select “ book -> 2 ”. Z to display this screen...

  • Page 49

    Chapter 2 more menus features 49 4 select the page order of the original. 5 select the copy format, and then select “ ok ”. Z for the following procedure, refer to steps 5 to 6 of basic operation for the 2-sided copy mode (see page 43). The left page of the facing pages is copied first. The right pa...

  • Page 50

    Chapter 2 more menus features 50 copying multiple pages onto a single sheet (n in 1 copy) multiple pages (2, 4 or 8 sheets) can be copied onto a single sheet. The images of originals are reduced to fit into the size of the copy paper. 1 2 3 4 6 7 8 5 6 4 5 8 7 3 1 2 3 1 2 4 3 1 2 4 4 1 4 3 2 a 6 4 5...

  • Page 51

    Chapter 2 more menus features 51 3 select the orientation of the original. 4 select the desired copy mode. When 1 -> 2, 2 -> 1 or 2 -> 2 is selected select the bind position of the original, and then select “ ok ”. Ex: when 1 -> 2 is selected for “ 2 in 1 ” when 2 -> 2 is selected, select the bind p...

  • Page 52

    Chapter 2 more menus features 52 5 select the layout format, and then select “ ok ”. When 2 in 1 is selected when 4 in 1 is selected when 8 in 1 is selected z for the following procedure, refer to steps 5 to 6 of basic operation for the 2-sided copy mode (see page 43). 1 2 1 2 1 2.

  • Page 53

    Chapter 2 more menus features 53 copying originals with saddle-stitch binding (booklet) z originals should be placed on the adf. (a5 or a4 size is only available, up to 60 originals) z saddle-stitch binding is possible only when the optional 1bin saddle-stitch finisher (da-fs405w) is installed. A3, ...

  • Page 54

    Chapter 2 more menus features 54 when “ 2 sided ” is selected select the bind position of the original, and then select “ ok ”. 3 select the bind position for the copy. 4 select the cover page type if necessary. Select “ cover ”. Select the cover type. Z when “ blank ” is selected for the cover type...

  • Page 55

    Chapter 2 more menus features 55 5 select “ ok ” to exit the cover settings. 6 select “ ok ”. Z for the following procedure, refer to steps 5 to 6 of basic operation for the 2-sided copy mode (see page 43). Z when the fold position does not match with the centre position of the copies, set the bindi...

  • Page 56

    Chapter 2 more menus features 56 copying mixed size originals from the adf use this function when copying mixed size originals (a4 and a3, or a5, a4r, and b4). Using the adf, original size can be detected automatically and copied in the same size or the specified size. Z when copying in the 2-sided ...

  • Page 57

    Chapter 2 more menus features 57 3 select the desired copy mode, and then select “ ok ”. When 1 -> 2, 2 -> 1 or 2 -> 2 is selected select the orientation of the original. Select the bind position of the original, and then select “ ok ”. Ex: when 1 -> 2 is selected when 2 -> 2 is selected , select “ ...

  • Page 58

    Chapter 2 more menus features 58 4 when copying the same paper size, select “ basic menu ”, and then select a desired copy size with the copy size buttons. Z for the following procedure, refer to steps 5 to 6 of basic operation for the 2-sided copy mode (see page 43). Ex: combination of a4 (portrait...

  • Page 59

    Chapter 2 more menus features 59 copying special originals (thin paper, etc.) from the adf sadf this mode adds a 5-second delay to allow another original to be placed on the adf. Special originals (thin paper, etc.) can be fed from the adf and copied continuously using the sadf mode. 1 place one ori...

  • Page 60

    60 chapter 2 more menus features job build this is useful for copying multiple sets of originals that exceed the maximum capacity of the adf of 100 sheets (80 g /m 2 / a4). (see the example below.) ex: to make 5 sets of sorted copies of 115-sheet of originals. 1. Place the first 100 sheets of origin...

  • Page 61

    61 chapter 2 more menus features sort mode the original can be copied, printed, and sorted in a specified number of sets. The following finishing modes are available when the optional finisher and punch unit are installed. Z only a4/a4r size is applicable for “ rotate-sort ” and “ rotate-group ”. Wh...

  • Page 62

    Chapter 2 more menus features 62 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the machine is set to other function mode. 3 select “ more menus ”. 4 select “ sort / finish ”, and then select a sort mode. When optional finisher is not installed when the optio...

  • Page 63

    Chapter 2 more menus features 63 when the optional 1bin finisher is installed. Z when “ staple-sort ” is selected, refer to the following. Select the orientation of the original, and then the staple position. 5 enter the desired number of copies. 6 press the start key. Z when copying from the platen...

  • Page 64: Variable Ratios

    Chapter 2 more menus features 64 zoom mode variable ratios the original can be copied by setting the enlargement/reduction ratio. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the machine is set to other function mode. 3 select “ more menus ”. 4 select “ zoo...

  • Page 65

    Chapter 2 more menus features 65 6 enter the zoom ratio with and , or the keypad, and then select “ ok ”. Z the ratio can be set in 1% increments from 25% to 400%. Z when changing the paper size after setting the zoom ratio, select “ basic menu ”, and select “ paper/output tray ”, and then select th...

  • Page 66: Auto Zoom

    Chapter 2 more menus features 66 auto zoom by setting auto zoom, originals can be automatically enlarged/reduced to fit the size of the loaded paper. Z this function can be selected when the original is placed on the platen glass. Z as the original is placed on the platen glass, the position of the ...

  • Page 67

    Chapter 2 more menus features 67 5 select the desired zoom type ratio, and then select “ ok ”. 6 select the desired size of paper, and then select “ ok ”. 7 enter the desired number of copies. 8 press the start key. Z when copying from the platen glass, place the next original, and follow the instru...

  • Page 68: Setting A Blank Edge

    Chapter 2 more menus features 68 effect modes setting a blank edge unnecessary edge can be erased by setting a blank edge. Z when “ zoom ” is selected, the erasing width varies depending on the zoom ratio. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the ma...

  • Page 69

    Chapter 2 more menus features 69 5 select “ xy ” to set the same value for x and y, or “ x ” or “ y ” to set a different value for x and y. 6 enter the erasing width with and , or the keypad, and then select “ ok ”. Z the erasing width can be set in 1 mm increments from 5 mm to 99 mm. 7 enter the de...

  • Page 70

    Chapter 2 more menus features 70 eliminating dark inner binding shadows when copying original such as the centre of folding position may be shaded, the shade can be easily eliminated. Z when “ zoom ” is selected, the erasing width varies depending on the zoom ratio. Z when “ overlay ” or “ formoverl...

  • Page 71

    Chapter 2 more menus features 71 shifting image to right, left, up, or down the margin can be added on any 4 sides of the image with the image shifted to the right, left, up, or down accordingly. Z if a part of the copied image is missing, change the margin reduction setting to “ yes ”. Refer to cop...

  • Page 72

    Chapter 2 more menus features 72 5 select the desired position of the binding margin. 6 enter the width of the binding margin with and , or the keypad, and then select “ ok ”. Z the width of the binding margin can be set in 1 mm increments from 5 mm to 99 mm. 7 enter the desired number of copies. 8 ...

  • Page 73: Copying Mirror Image

    Chapter 2 more menus features 73 copying mirror image the laterally reversed image of original can be copied. 1 place original(s). Z refer to placing originals (see page 6). 2 press the copy key if the machine is set to other function mode. 3 select “ more menus ”. 4 select “ zoom / effects ”, and t...

  • Page 74: Copying With Stamping

    Chapter 2 more menus features 74 copying with stamping page number or date, etc. Can be stamped on each sheet. Z this function can be selected when the original is placed on the adf. Z only one kind of stamp can be selected from page number, issue number, date, and text/number for each scan job. Z s...

  • Page 75

    Chapter 2 more menus features 75 page number the original can be copied with page numbers printed. Z the default is -n- (number) format. To change to n/m (number/maximum) format, refer to copier settings in the operating instructions (for function parameters) of provided cd-rom. Z make sure to selec...

  • Page 76

    Chapter 2 more menus features 76 5 if “ change ” was selected in step 4, select the starting page. 6 if “ change ” was selected in step 4, enter the starting number with and , or the keypad, and then select “ ok ”. Z starting page number can be set from 1 to 999. 7 select “ ok ”. Z for the following...

  • Page 77

    Chapter 2 more menus features 77 issue number the original can be copied with consecutive numbers from 001 to 999 printed. Z the issue numbers can be set from 001 to 999. After 999, the number returns to 001. 1 select “ issue number ”. Z to display this screen, refer to steps 1 to 4 of basic operati...

  • Page 78

    Chapter 2 more menus features 78 4 enter the starting number with and , or the keypad, and then select “ ok ”. Z for the following steps, refer to steps 5 to 6 in the basic operation for stamping (see page 74). Each time it is selected, the number increments by 1. Each time it is selected, the numbe...

  • Page 79

    Chapter 2 more menus features 79 date the original can be copied with a date printed. The date is printed in the dd/mm/yyyy format. 01/01/2009 01/01/2009 1 select “ date ”. Z to display this screen, refer to steps 1 to 4 of basic operation for stamping (see page 74). 2 select the orientation of the ...

  • Page 80

    Chapter 2 more menus features 80 the cursor is displayed. Move the cursor to the desired position using and . Change the date with the keypad. 5 select “ ok ”. Z for the following steps, refer to steps 5 to 6 in the basic operation for stamping (see page 74)..

  • Page 81

    Chapter 2 more menus features 81 text / number the original can be copied with text and page/issue numbers printed. Z page numbers are printed in -n- (number) format. Z page and issue numbers can be entered from 001 to 999. After 999, the number returns to 001. Z up to 32 characters, including a to ...

  • Page 82

    Chapter 2 more menus features 82 4 select “ change ”. 5 enter text, and then select “ ok ”. Z up to 32 characters. Z for instructions on how to enter characters, refer to using the keyboard in the operating instructions (for function parameters) of provided cd-rom. 6 select “ page ” or “ issue ”. 7 ...

  • Page 83: Centering

    Chapter 2 more menus features 83 centering the copying image can be centered automatically on a selected paper. Z this function can be selected when the original is placed on the platen glass. Z as the original is placed on the platen glass, the position of the original may be erroneously detected i...

  • Page 84

    Chapter 2 more menus features 84 5 select the desired type of paper, and then select “ ok ”. 6 enter the desired number of copies. 7 press the start key. Z after finishing copying, press the reset key to return to the initial screen of the current active mode. 1 2.

  • Page 85: Image Repeat

    Chapter 2 more menus features 85 image repeat create multiple images on a sheet from a single original. Z dotted lines can be printed between each of the copied images. Refer to copier settings in the operating instructions (for function parameters) of provided cd-rom. Z this function can be selecte...

  • Page 86

    Chapter 2 more menus features 86 5 select the desired type of paper, and then select “ ok ”. 6 enter the desired number of copies. 7 press the start key. Z after finishing copying, press the reset key to return to the initial screen of the current active mode. 1 2.

  • Page 87: Copying Inverse Image

    Chapter 2 more menus features 87 copying inverse image the tonal inversion of image can be copied in black and white. Z this function is only available when “ black ” is selected in the colour mode. If the “ inverse ” is selected when the other colour mode has been set, a message appears prompting y...

  • Page 88

    Chapter 2 more menus features 88 insertion modes adding a cover page to copies the original can be copied using other types of paper for a cover page. Only the front cover, or front and back covers can be selected. The front cover is copied on colour paper. 1 place original(s) on the adf. Z refer to...

  • Page 89

    Chapter 2 more menus features 89 6 select “ cover ” until the desired paper tray is displayed. Z when changing paper for copies other than the cover page, select “ copy ”, and change the paper tray. Z when using colour or special paper for the cover page, place the paper in the sheet bypass or any t...

  • Page 90

    Chapter 2 more menus features 90 inserting blank/copied pages between copies the original can be copied by inserting other types of paper between specified pages. You can copy specified pages (including the cover page) on paper such as coloured paper set in a paper tray or on the sheet bypass. 1 2 3...

  • Page 91

    Chapter 2 more menus features 91 z when using colour paper for the inserted page, place the paper in the sheet bypass beforehand, and also select the type of paper that you will use. If the type of paper is not selected properly, the quality of the image may become poor. Refer to the operating instr...

  • Page 92

    Chapter 2 more menus features 92 inserting blank pages between transparency films 1 place original(s) on the adf. Z refer to placing originals (see page 6). 2 press the copy key if the machine is set to other function mode. 3 select “ more menus ”. 4 place the transparency films on the sheet bypass....

  • Page 93

    Chapter 2 more menus features 93 8 enter the desired number of copies. 9 press the start key. Z after finishing copying, press the reset key to return to the initial screen of the current active mode..

  • Page 94

    Chapter 2 more menus features 94 overlay modes overlaying an image onto the copies the original can be overlaid with the first page of the original. The first page is called the overlay original, and the second page onwards are called the scanned original, respectively. Z the size available for both...

  • Page 95

    Chapter 2 more menus features 95 4 select “ insertion / overlay ”, and then select “ overlay ”. 5 select colours for the overlay original from the basic colours or registered custom colours, and then select “ ok ”. When selecting from the basic colours when selecting from the registered custom colou...

  • Page 96

    Chapter 2 more menus features 96 10 select “ yes ” or “ no ”. 11 if “ yes ” was selected in step 10, select a desired button with no names registered, and then select “ ok ”. 12 enter the button name with keyboard, and then select “ ok ”. Z up to 20 characters. Z for instructions on how to enter cha...

  • Page 97

    Chapter 2 more menus features 97 overlay copying with registered image overlay an image stored in memory onto the copy. Z to use this function, overlay forms must be registered in advance. For instructions on registering overlay forms, refer to file edit (see page 99). Z available size is a4. Z “ au...

  • Page 98

    Chapter 2 more menus features 98 4 select “ insertion / overlay ”, and then select “ formoverlay ”. 5 select the registered form, and then select “ ok ”. Z for the details about how to register the form, refer to save (see page 99). 6 select the overlay position, and then select “ ok ”. 7 enter the ...

  • Page 99: File Edit

    Chapter 2 more menus features 99 file edit up to 12 settings can be registered for the overlay form. Z refer to overlay copying with registered image (see page 97). Save z the size of the original, which can be registered in the form, is a4. Z after the registration, the form transparency level and ...

  • Page 100: 100

    Chapter 2 more menus features 100 7 select colours for the form from the basic colours or registered custom colours, and then select “ ok ”. When selecting from the basic colours when selecting from the registered custom colours z if “ add custom ” is selected, the add custom screen is displayed, an...

  • Page 101: 101

    Chapter 2 more menus features 101 erase 1 select the file name to be deleted. Z to display the file edit screen, refer to steps 2 to 4 in save (see page 99). 2 select “ erase ”, and then select “ ok ”. 3 select “ yes ”. Z after completing the deletion of the file, press the reset key to return to th...

  • Page 102: 102

    Chapter 2 more menus features 102 double exposure both sides (front and back) of a 2-sided original can be copied onto one side of a sheet. 1st scanned side of the original is copied at the bottom of the page, and the 2nd scanned side at the top. Z this function is only available when copying a 2-si...

  • Page 103: 103

    Chapter 2 more menus features 103 4 select “ insertion / overlay ”, and then select “ double exposure ”. 5 enter the desired number of copies. 6 press the start key. 7 select “ yes ” to copy the 2nd scanned side of the original. Z the message is different according to the sort mode. 8 place the 2nd ...

  • Page 104: 104

    Chapter 3 other f eatures 104 3other features making copies with the adf opened the original can be copied without generating dark borders even if the adf is opened. Digital skyshot mode the digital skyshot mode can be selected in the standard settings. Z when “ 2 page ” or “ n in 1 ” is selected, o...

  • Page 105: 105

    Chapter 3 other f eatures 105 manual skyshot mode the original can be copied with the pre-registered scan size in memory. Z before using the manual skyshot mode, set m1 or m2 in the preset jobs. Refer to copier settings in the operating instructions (for function parameters) of provided cd-rom. Z or...

  • Page 106: 106

    Chapter 3 other f eatures 106 reserving the next copy job while the current copy job is progressing the next copy job can be reserved while the current copy job is under way. Z the previous copy job settings can be saved if the function parameter 41 reserve a job settings (copier settings > key oper...

  • Page 107: 107

    Chapter 3 other f eatures 107 interrupting the current copy jobs to make an urgent copy you can interrupt the current copy jobs and make an urgent copy. Z when scanning the current copy job, other copy jobs cannot be interrupted. 1 press the interrupt key while copying. Z the machine does not accept...

  • Page 108: 108

    108 chapter 4 appendix 4appendix combined copy functions newly set functions 1 -> 2 2 -> 1 2 -> 2 2 pag e book -> 2 n i n 1 book le t mu lti-s ize fe ed jo b bui ld & sadf sort no n s or t shif t-sort shif t-group r ota te -s o rt r ota te -g ro up st ap le -s o rt punc h zoom auto zoo m 1 -> 2 / a ...

  • Page 109: 109

    109 chapter 4 appendix newly set functions edge book ma rg in m irror s tam pi n g ce n te ri ng ima ge r epe at inv e rs e co ve r page ins e rt ion t rans pa renc y inte rle a vi ng ov er la y form o ve rlay di g ita l s ky sh o t ma nua l sk ys ho t c omp le tion noti ce inte rrupt proof c opy d ...

  • Page 110: 110

    110 chapter 4 appendix da-fs402w da-fs405w rotate-sort not available not available rotate-group not available not available shift-sort available available shift-group available available staple-sort stapled in 1 position. Stapled in 1 front position. Stapled in 1 inner position. Stapled in 2 centre ...

  • Page 111: 111

    Chapter 4 appendix 111 4appendix index symbols “m1:”/“m2:” ......................................................................37 numerics 1 -> 1 ..............................................................................43 1 -> 2 ..............................................................44...

  • Page 112: 112

    Chapter 4 appendix 112 original orientation .......................................................... 8 original size .................................................................... 6 original type ................................................................. 21 other types ..................

  • Page 113: 113

    113 chapter 4 appendix appendix memo.

  • Page 114

    For service, call: x1208-1019 (03) pjqmc1345zb january 2009 published in japan for customer support: panasonic communications co., ltd. Fukuoka, japan http://panasonic.Net © panasonic communications co., ltd. 2009 unauthorised copying and distribution is a violation of law. The contents of these ope...