Pocket Wizard MultiMAX Owner's Manual - Selective Quad-Triggering (

1

Selective Quad-Triggering (

A B C D

 keys)

This powerful feature is used to individually control up to  

4 sets of MultiMAX units (set for RECEIVE mode) on the 

same channel. Each keypad letter, A B C D refers to an 

individual zone. Each zone can be independently selected 

or deselected from a MultiMAX (set for TRANSMIT mode).

Follow the steps below to test Quad-Triggering:

1. Set one MultiMAX to TRANSMIT mode

2. Set up to 4 MultiMAX units to RECEIVE mode (same 

channel as TRANSMIT unit)

3. Using the A B C D L keys set each RECEIVE unit 

to a different zone

4. On the TRANSMIT unit use the A B C D L keys to 

select which zones will trigger. The zone is selected 

when the letter is displayed on the LCD screen. The 

zone is deselected when a dot appears where the 

letter would be displayed.

5. Press the TEST key on the MultiMAX (set for 

TRANSMIT mode) unit to trigger the selected zones 

Any number of MultiMAX units (set for RECEIVE mode) 

may be set to the same channel and zone, and will 

trigger simultaneously. Selective Quad-Triggering is only 

available on channels 17 and higher.

TRANSMIT unit 

Channel: 17 

Zones: A, B, and Local

RECEIVE unit 

Channel: 17, Zone: A

RECEIVE unit 

Channel: 17, Zone: B

TRANSMIT unit 

Channel: 17 

Zones: A, B, and Local

RECEIVE unit 

Channel: 17, Zone: A

RECEIVE unit 

Channel: 17, Zone: B