Pocket Wizard MultiMAX Owner's Manual - Counter Menu

0

CounTer Menu

Press  /MENU C enter the Counter Menu. This menu  

controls the counter functions of the MultiMAX. The 

counter can show the total number of triggers. Count is 

incremented on every trigger from any source: PORT 1, 

TEST button, Hot Shoe, or Radio Trigger.

A: Count Up + Reset – 

/MENU C A

Count is set to COUNT UP (example: 0,1,2,3,...) and the 

counter is reset to 0. The main screen will display  

COUNT 

↑

: 0.

B: Count Down + Reset – 

/MENU C B

Count direction is set to DOWN (example: 10,9,8,7,...), you 

are prompted to enter a count, then the counter is reset. 

The main screen will display COUNT R: XXXX

Î

  The count down function could be used to indicate 

the number of remaining frames for a remote camera.

C: Clear / Reset – 

/MENU C C

Count direction is not changed. Counter is reset to 0 if 

count direction is set to up, or the counter is reset to the 

load value if count direction is set to down. If the counter 

is disabled, then this function will enable the counter using 

the last count direction set. The Counter is cleared and 

reset in this fashion when the unit is powered down.

Î

  Use   C C as an easy to remember quick key combination for fast counter reset.

D: Disable – 

/MENU C D

Counter is disabled and is not displayed on the main screen. While disabled the counter 

does not count.

Counter Menu

Counter Menu

TRANSMIT unit set to  

Count Up

TRANSMIT unit set to  

Count Up

Load Counter Screen

Load Counter Screen