Pocket Wizard MultiMAX Owner's Manual - page 24

N

  Confirmation can only be performed using MultiMAX units on channels 17 and higher. 

PocketWizard Plus, Classic, and the original MAX do not perform confirmation.

N

  True Confirmation is designed to work with one MultiMAX (set for RECEIVE mode) per 

zone. Multiple RECEIVE units set to the same channel and zone will not individually 

confirm and may cause incorrect confirmation errors. If multiple MultiMAX units (set 

for RECEIVE mode) on the same channel and zone are a mix of flash and non-flash 

confirmation units then accurate flash confirmation will not be reported.

The following table shows how confirmation works in different modes:

MultiMAX Mode

Radio and Flash Confirmation

A RECEIVE unit using Selective Quad-Triggering

Provides normal radio and / or flash confirmation

A RECEIVE unit set to a Delay mode 

Will not provide confirmation

A RECEIVE unit set to FAST MODE

Confirms on zone A only

A RECEIVE unit set to Intervalometer or Multipop

Provides radio confirmation before the first interval only

Note: Older MAX and MultiMAX units set to FAST MODE will not confirm on any zones.