Pocket Wizard MultiMAX Owner's Manual - A: Port 1 + Port 2 –
A: Delay Menu - RECEIVER –
/MENU A A
Enters the delay menu for a MultiMAX (set for RECEIVE
mode). Each RECEIVE unit can have its own delay for
sequences or for synchronization. To easily delay all RECEIVE
units the same amount, use the Transmitter’s delay.
N
RECEIVE units set to delay do not perform
confirmation.
A: PORT 1 + PORT 2 –
/MENU A A A
Enters the numeric entry screen. PORT 1 and PORT 2 are
delayed the same amount and trigger simultaneously after
the set delay time. Both ports remain contacted for the set
contact time. Triggers can come from either the TEST
key or a radio trigger from any PocketWizard Transmitter.
On the main display a small letter D will appear to denote
that PORT 2 will be delayed.
☞
Pressing L will toggle Relay Mode on and off but
PORT 2 will still trigger after the set delay. See the
Relay Mode section, Page 39, for more information.
B: PORT 2 –
/MENU A A B
Enters the numeric entry screen. PORT 1 triggers immediately upon pressing TEST key
or Radio Trigger. PORT 1 contact is held for the set delay time. PORT 2 triggers after the
set delay time and contact is held for the set contact time.
RECEIVE unit
Delay Menu
RECEIVE unit
Delay Menu
RECEIVE unit
PORT 1 + PORT 2 delayed
RECEIVE unit
PORT 1 + PORT 2 delayed