Q-See QC-SERIES Quick Start Manual - page 2
OPTION
A
OPTION
B
VGA
MIC
OUT
IN
RS232
OR
VGA
19”+
OPTION
A
OPTION
B
OPTION
A
OPTION
B
VGA
MIC
OUT
IN
RS232
OR
VGA
19”+
OPTION
A
OPTION
B
Choose video display option A or B:
OPTION A
HDMI
A. Plug the included HDMI cable
into the NVR’s HDMI port.
B. Connect the other end of the
HDMI cable to the monitor or TV.
C. Plug the monitor or TV into a
surge protector.
OPTION B
VGA MONITOR
A. Plug a VGA cable (not included)
into the NVR’s VGA port.
B. Connect the other end of the
VGA cable to the monitor.
C. Plug the monitor into a surge
protector.
NOTE: The monitor must
me 19” or larger
NOTE: This is the highest
quality viewing option
NOTE: Your NVR model may differ from that shown in this illustration.
STEP 2
CONNECT TO VIDEO DISPLAY
Plug the mouse into the USB port
3
on the back of the NVR.
NOTE: The USB port on the front of the NVR is used for backing up
video files.
RJ45 Ethernet
Cable
STEP 3
CONNECT MOUSE
STEP 4
CONNECT TO ROUTER
STEP 5
TURN ON NVR
VGA
MIC
OUT
IN
RS232
VGA
MIC
OUT
IN
RS232
A. Plug the included Network (Ethernet) cable into
the Network port
4
on the back of the NVR.
B. Connect the other end of the cable to an open
port on your router (not included).
Before starting the NVR, download the free QC View App (for mobile
phones) or QC View HD App (for tablets) from your device’s app store.
A. Plug the NVR power supply into the power
port on the back of the NVR.
B. Plug the power cable into a surge protector.
C. Turn on the NVR’s power switch.
The NVR will beep as it powers up.
STEP
3
STEP
4
The Start Up Wizard will appear on-screen after a few minutes.
A
B