Q-See QC-SERIES Quick Start Manual - page 3
STEP 7
QC VIEW MOBILE APP
When you can view live video from the cameras, they
are tested and ready to be installed.
QC VIEW GLOSSARY
DVR Title: Use descriptive name, such as “Home DVR” or “Office” to help keep
track of multiple systems.
Username: User ID selected during DVR setup (“admin” is the default username)
Password: Password selected during DVR setup (“admin” is the default
password)
Channel Amount/Max Channel: The maximum number of channels that can be
viewed at once. More channels may slow the video feed.
To view cameras, you need to add your DVR to the app.
A. Tap on Menu
B. Select Device Manager
C. Select Add (+)
D. Scan the QR code, enter your username, and password
E. Tap Save to return to the Home Screen
F. Tap “<” to return to the home screen
G. Select Live Preview
H. Double-tap on +. Select DVR and camera
B
C
D
E
G
F
H
A
STEP 6
START UP WIZARD
When the startup wizard appears, follow the on-screen instructions
to complete the NVR setup and connect to the internet using Q-See’s
Scan N’ View service.
WIZARD GLOSSARY
DST (Daylight Savings Time): Set DST to change where applicable.
Click Set to enter the start and end dates. Make sure the box is checked.
NTP (Network Time Protocol): Maintains the accuracy of the NVR’s
clock. Check the box to turn on.
Language: This is the language the NVR will use.
NOTE: If a new language is selected, the NVR will restart. The wizard will
continue in English but menus will be in the selected language.
Local IP Address (LAN): The NVR’s address on the network. Write the
address on the line below. To access the NVR from a computer on the
same network, enter this address into the web browser.
To complete setup, launch QC View App on your mobile device.
Local Address (LAN):
____________________________________________
To prevent the wizard from running again, uncheck the startup option.
To access your NVR over the Internet on a computer (Mac or PC) go to
www.q-seeqcview.com
Q-SEE QC VIEW ON YOUR COMPUTER
A. Create a user account by clicking on Sign Up Now.
B. Log into your new account.
C. Click on Add Device.
D. Enter a name for your NVR, its Serial Number (shown in the silver label
on the NVR’s case), your user name and password.
E. Select your NVR from the list.
F. Click to start viewing your cameras.