QTek 9090 User Manual - Turning On Wlan:
Pocket PC Phone User Manual
68
Pocket PC Phone User Manual
69
Getting
Connected
Getting
Connected
n
Today Screen
: Open the Today Screen. If the device has detected a WLAN network
connection, the W icon is shown on the top right, and a WLAN icon is shown on the bottom
right.
n
Wireless Manager
:
Select
Wireless Manager
from the
Programs
menu. Tap on the WiFi
icon to access a channel.
The availability and range of your device’s WLAN signals may depend on the number,
thickness and location of walls, ceilings or other objects that the wireless signal must pass
through.
Turning on WLAN:
To use
WLAN
on your Pocket PC Phone, you need to turn on the internal
WLAN
antenna
on your device:
1. Tap the
Start
menu
>
Settings
>
the
Connections
tab
>
WLAN.
2. On the
Main
tab, select the
Wireless LAN ON
check box to turn the
WLAN
on.
When your
WLAN
is powered on, the LED indicator for Wireless LAN, located on the left
upper corner of your device, will blink green for every
6
seconds to indicate
WLAN
is on,
or alternate between blinking green and blinking blue for every
3
seconds if
Bluetooth
is
also turned on.
Adjusting the Power Save Mode
To save battery power, turn WLAN off when you are not using your Pocket PC Phone. You
can set the Power Save Mode when turning WLAN on by tapping and dragging the control
bar on the Settings tab.
1. Tap the
Start
menu
>
Settings
>
the
Connections
tab
>
WLAN.
2. Tap the
Settings
tab, tap and drag the Power Save Mode slider to the desired power save
setting. You can also use the left/right buttons on the navigation pad to move the slider.
n
Best Performance
: No
WLAN
Power Save. Use only if the absolute highest
WLAN
throughput is required or if your network configuration does not support these modes.
n
Best Battery
: Uses the least battery power while maintaining a
WLAN
connection. This
mode significantly reduces the
WLAN
data throughput. It is not recommended for large file
transfers or when
Bluetooth
is on.
Turning on Auto Off
You can turn off your pocket PC phone's WLAN antenna automatically if no signal is de-
tected in order to save battery power. Choose between 2, 3, 4, or 5 minute intervals once
the box is selected.