QTek 9090 User Manual - 6.10 Wireless Modem
Pocket PC Phone User Manual
84
Pocket PC Phone User Manual
85
Getting
Connected
Getting
Connected
6.10 Wireless Modem
This utility will simulate your device as a wireless modem, and let your PC/Notebook be
connected to a wireless network.
Wireless Modem
allows you to select the various wireless
connection types:
Serial
,
IrDA
,
USB
, or
Bluetooth
.
Connecting via Serial Port or IrDA
Before create a new modem via
IrDA
connection, you need install the software
IrCOMM2k
.
IrCOMM2k
is a driver for
Windows 2000
and
XP
. It emulates a serial port which can be used
to exchange data with mobile devices. Go to
http://www.ircomm2k.de
to download the driver
and install it on your PC by following the installation instruction provided on the web.
If you are using a
Serial port
connection, you can just start the settings on your PC and your
Pocket PC Phone as described below. No additional driver needs to be installed.
Settings on your PC
Contact your
ISP
to get the
APN (Access Point Name)
.
Before you start using your
Wire-
less Modem
with a
serial port
or
IrDA
connection, you need to create a new modem on
your PC first:
1.
Click
Start
>
Settings
>
Control Panel
>
Phone and Modem Options
.
2.
Add
a new modem by selecting the
Modem
tab.
3. Enable the checkbox
Don't detect my modem; I will select it from a list
.
4. Select
Standard Modem Types
in the
Manufacturers
field, select
Standard 33600 bps
Modem
, then select
Next
.
5. Select your modem port and click
Next
.
6. When a
Modem installation is finished!
screen appears, click
Finish
to go back to the
Modem
tab mentioned in
Step 2
. Now you can see a
Standard 33600 bps Modem
in the
modem list.
7. Highlight the modem you just created, click the
Properties
button, and select the
Advanced
tab.
8. Enter the complete string in the
Extra initialization commands:
field:
AT+CGDCONT=1
,"IP","APN","",0,0
.
9. Remember to click the
Change Default Preferences
button after entering the required
string as mentioned above.
10.Click the
General
tab and set the
Float control
by selecting
None
from the drop-down list.
Keep pressing
OK
until the modem installation wizard exits.
A new standard modem is now set up successfully on your PC, but you still need to create
a new dial-up connection: