QTek 9090 User Manual - My Shortcuts
Pocket PC Phone User Manual
82
Pocket PC Phone User Manual
83
Getting
Connected
Getting
Connected
One
Bluetooth
device must be the host of the personal area network. Other
Bluetooth
devices join the network as clients. The host can accept and reject clients on an individual
basis.
To host a
Personal Area Network
:
1. Select
Bluetooth Manager >
New
>
Connect
>
Join a personal network
>
Next
.
2. On the next wizard screen, select
Host a personal network
>
Next
.
3. Add remote devices to the
Bluetooth
Personal Area Network
, if desired:
Tap the
Add
button and select the device to be added.
Add additional devices, if desired. You can select up to eight total, including the host.
After all the desired devices have been added, tap
OK
to complete the setup and close the
wizard. Adding devices is optional; devices do not have to be added to the
personal area
network
when the
Host
is configured. Devices can join the personal area network later
.
To join a
Personal Area Network
:
1. Select
Bluetooth Manager >
New
>
Connect
>
Join a personal network
>
Next
.
2. On the next wizard screen select
Join a personal network
>
Next
.
When
Bluetooth Browser
appears, select the host of the personal area network, and
then tap
Nex
t to establish a connection to the personal area network. If asked to enter
IP
network settings, select
Use server-assigned IP address
, and then tap
OK
.
The network host’s authorization and authentication settings, and/or its
Personal Area
Network
service availability may prevent you from joining the network. Any application
that requires a network connection can use the
Personal Area Network
connection.
My Shortcuts
The default tab on the
Bluetooth Manager
is
My Shortcuts
. This screen displays the icons
that have been created for connections to other devices. The icons provide visual feedback
about the status of the connection to which they are linked.
The double-tap is context sensitive:
n
If the connection is not open, double-tap its icon to establish a connection.
n
If the connection is open, double-tap its icon to display the connection’s status. Connections
can also be opened/closed, and other options accessed, using the tap-and-hold technique. If
you tap a connection icon and hold the stylus in place for a few seconds, a context sensitive
menu appears.
Active Connections
This tab displays the active
Outgoing
and
Incoming Connections
on your Pocket PC
Phone.