T&D MCR-4V User Manual - Using Sd Memory Cards

15

Overview

Using SD Memory Cards

It is not only possible to transfer data stored in the internal memory to 

an SD memory card, but it is also possible to automatically backup data 

while recording in endless mode. Operations related to the use of an SD 

memory card are as follows:

Record in internal 

memory

Copy data to a 

memory card

Copy

to a PC

Exporting Data while Recording is OFF (Manual Saving) See p.38 for 

details

 [Data List]—[Export Selctd Data]

 [Data List]—[Export All Data]

Exporting Data while Endless Recording is ON (Manual Saving / 

Automatic Saving) See p.42 for details

 [Data List]—[Expt Curr Data Now]

 [Data List]—[Auto Data Export]

IMPORTANT

- Memory cards are not included. Please purchase separately.

- Measurement data cannot be directly recorded into a memory card.

- Before inserting an SD memory card into the device, make sure to switch off write 

protection on the memory card.

- Exporting data to the memory card will not erase it from the device’s internal memory. 

Delete recorded data in the device as necessary.

Supported Memory Cards

- SD Memory Cards

- SDHC Memory Cards

IMPORTANT

- SDXC memory cards cannot be used.

- It is possible to run a quick test to see if your memory card works in. See p.44 for details.