T&D MCR-4V User Manual - Making Settings Via Pc
50
Making Settings via PC
The following items are not included on the device menu, and can only
be set or changed from “MCR for Windows” by connecting the device
to a computer via USB.
Channel Name
Create and assign names to each of the channels to be used for
recording. Channel Names are used for display in “T&D Graph”.
1.
Select the [Recording Start Settings] menu in “MCR for Windows”.
2.
Place a check next to the desired channel(s) and enter each channel
name.
3.
Click [Send Settings].
Scale Conversion Equation
1.
Select the [Scale Conversion / Unit Settings] menu.
2.
Place a check next to the desired channel(s).
3.
Set “Scale Conversion” to ON for each channel.
4.
Select either [Convert by using the equation: y=ax+b] or [Convert by
specifying 2 points], and enter a value in each box.
5.
Select the number of significant digits after scale conversion.
6.
Click [Apply Settings].
Unit Settings
1.
Select the [Scale Conversion / Unit Settings] menu.
2.
Open the “Measurement Unit” tab page, and set [Unit for use in Graph]
for display in “T&D Graph” and [Unit for use in LCD] for measurements
and graph display in LCD.
3.
Click [Apply Settings].