T&D MCR-4V User Manual - Units

53

Using a PC with MCR-4V

Download Recorded Data from all Connected MCR-4V 

Units

1. 

Connect the Master unit to your computer via USB.

2. 

Get a data list for the Master. (see p.51)

3. 

Click [Search for Slave] to get data lists for the connected Slave units.

4. 

Place a check next to the target data.

*  It is possible to select data from both the Master and Slave unit(s) for simultaneous 

download.

5. 

Click [Download].

*  If it takes too long to download data recorded from Slave units, it is also possible to 

directly connect a Slave to the PC via USB and download individually. (You can 

switch the USB cable from the Master to connect a Slave.)

IMPORTANT

Do not disconnect the USB cable during communication between a device and the PC.