T&D MCR-4V User Manual - [Memory Card] Menu Items
44
[Memory Card] Menu Items
[Quick Format]
Select [OK] to format your SD memory card for use in the MCR-4V.
IMPORTANT
- This process will erase all recorded data from the SD memory card. It is recommended
to make backups of recorded data to a PC before formatting the memory card.
- It is not possible to erase individual data readings from the SD memory card.
- Do not turn off the power while the device and SD memory card are in communication.
If the device is running on batteries, make sure the batteries have power and are
installed correctly. If power is supplied by a PC over the USB bus, avoid power supply
disruption due to cable disconnection or power-saving settings on the PC.
[Memory Card Test]
Select [OK] to check if your SD memory card can be used with the
MCR-4V. Not all commercially available SD memory cards can be used. It
is recommended to do this test before using.
IMPORTANT
If the memory card you wish to use passes the test but has problems when using, carry
out “Quick Format”.