T&D MCR-4V User Manual - Using McR-4V
16
Using MCR-4V
The following shows the basic flow of procedures.
4.
Measuring and Recording
5.
Viewing Recorded Data in Graph on the Device (see p.39)
Use MCR-4V Use PC
3.
Setting up the Device (see p.30)/ Making Recording Settings (see p.26)
* Recording Settings can be made both on the device and from a PC.
2.
Getting PC Ready
Install the provided software (see p.47)
Connect the device to a PC (see p.49)
1.
Getting Device Ready
Install the batteries (see p.17)
6.
Downloading Recorded Data to a PC
Exporting data to an SD memory card and transferring to a PC. (see p.38)
Using the supplied software “MCR for Windows” (see p.51)
* Either of the above can be used to download recorded data to a PC.
7.
Analyzing Recorded Data on a PC (see p.54)
View Graph, Print, Save in Text
When not using a PC, the only necessary steps are
1
and
3
to
5
.