T&D MCR-4V User Manual - Measuring Voltage
18
Measuring Voltage
1.
Connect the item to be measured to the MCR-4V using a compatible
wire.
1. Prepare a compatible 10mm strip wire (see
Spec).
2. Using a screwdriver or other such tool, while
pressing down on the terminal button
on the top of the device, insert the wire into
the hole .
3. When removing the wire, push down on
and gently pull the wire out of the hole .
Enlarged View of
Input Terminal
Top Surface
A
B
* Absolute maximum input voltage is 50V.
* Maximum measurable input voltage is ±24V.
2.
Press
measurement and/or trend graph.
Measurements
Trend Graph
About the Measurements Display
The font size used to display the measurement automatically changes
depending on the number of channels.
* You can change the number of channels by going to the Main Menu and selecting
[Record Settings] > [Rec.Channel]. To change the [Rec.Channel] setting, [Detailed
Sett.] needs to be set to ON.
* When using the scale conversion, the converted value and unit are displayed.