TC Electronic SYSTEM 6000 MKII Algorithm Manual - page 101
101
rEflECTOr 6 & rEflECTOr lCr
Auto
Press the Auto Fly button and make the picture rotate
automatically (It is still possible to move the graphics even
when Auto rotating). This function is not only meant to be
a sales tool, but is actually useful to provide an overview of
the effect :-)
Tip: If you access the Hyper view page from the Single
view page, it is possible to adjust the last selected tap
parameters.
Shade
Set the Shade response curve (equalization) on this page.
Three bands (Lo-shelf, mid-parametric and Hi-shelf) are
available to form the desired response curve for the 24
individual Shade parameters.
Look at the Shade curve as a “max-range” for the color
adjustment to the taps (reflections). When a Shade
parameter is set to 100%, the resulting EQ curve is the
same as seen on the Shade EQ page.
EQ
Press the EQ button to access Frequency and Level
parameters for the three bands.
The EQ levels are only attenuating.
Type
Select the curve type for the three EQ bands. Band 1 and
3 are shelving types, band 2 is parametric type.
Diffusion Type
Selects between different diffuse/boundary types or turns
diffusion off.
The diffuse amount is an integrated part of the Shade
parameters.