TC Electronic SYSTEM 6000 MKII Algorithm Manual - Massenburg Eq
88
MAssEnburG EQ
Channel Parameter Link
For easier operation the EQ has different functions to Link
the I/O channels settings.
2-ch. version
Located at the Main page, following Link options are
available:
Link Relative
This option links the current settings of the left/right
channels, and adjustments are then performed relatively
equal to both channels.
Link Absolute
This option enables you to Link the two channels with
equal settings (True Stereo operation). When activating the
‘Link Absolute’ button, you have to confirm that you want to
link the two channels, because the function is “destructive”
in the sense that it overwrites the settings in Right channel
with the Left channel settings.
When Absolute Link is activated it’s not possible to
Link Relative or Copy channels.
Copy from Left to Right
Momentary feature that copies settings from Left channel
to Right channel.
Copy from Right to Left
Momentary feature that copies settings from Right channel
to Left channel.
6-channel version
At the Main page an
Enable Linking
button is present.
When activated it is possible to assign any of the six
channels to one of three Link Groups (Link A, B or C).
When linking channels, the settings from the lowest
channel-number will be copied into the higher numbered
channels. The Link groups will then be selectable with the
Channel select button located below the Output meters. If
a channel is not assigned to one of the three groups, it can
be operated as an individual channel.
Copying of channel-settings are performed instantly
when linking, therefore we recommend that careful
consideration is done when changing Link groups.
Also we recommend de-activating the
Enable
Linking
when not in use.
Input/Output Gains
For all channels an Input gain and Output gain parameter
is available.
Parameter range: 0dB to -120dB (Off).
2-ch. version
The Gain parameters are located at the Main page.
When Link Absolute the Gain settings are included in the
linking.
6-ch. version 8
The Gain parameters are located at the Level page.
When Linking channels in groups, the Gain settings are not
included.