TC Electronic SYSTEM 6000 MKII Algorithm Manual - Vss™ 6.1 - Reverb
30
vss™ 6.1 - rEvErb
Reverb Diffuse
Range: -50 to +50
Offsets the diffusion away from the default of a given
Decay time. For optimum performance, the diffusion is
automatically adjusted when Decay is changed.
Reverb Size
Range: 0 to 15
Adjusts the overall perceived size of the Diffuse Field part
of the response. It affects the spread and correlation of the
diffused response, not the decay time. The default value
depends on the Location Type chosen.
Reverb Type
Range: Normal/ Colored
When a Location Type is selected, a Reverb type is
automatically set. With the Reverb Type parameter it’s
possible to select between the most natural sounding
Diffuse field (Normal) and a more colored, glossy Diffuse
field setting.
Channel Decay
The following parameters are Decay multipliers for the
diffuse responses. The multipliers relate to the Master
Decay time. Example: If the Decay time is set at 2 seconds
and a multiplier is set at 0.5, the actual Decay time of the
selected channel is 1 second.
Left
Range: 0.1 to 2.0
Decay multiplier for the Left channel.
Center
Range: 0.1 to 2.0
Decay multiplier for the Center channel.
Right
Range: 0.1 to 2.0
Decay multiplier for the Right channel.
Left Surround
Range: 0.1 to 2.0
Decay multiplier for the Left Surround channel.
Right Surround
Range: 0.1 to 2.0
Decay multiplier for the Right Surround channel.
Center Surround
The diffuse part of the Center Surround channel is based
upon the Left and Right Surround multiplier settings.
Gloss
Reverb Modulation
Modulation Type
Range: Off, Default, Front/Rear, Front/Rear Subtle, Front
Rear Diffuse, Left/Right, Clockwise, Center Clockwise,
Chaos or Sync. Select between different types of
Modulation on the diffused response.
Mod Rate
Range: -50 to + 50
Offsets the speed of the modulation away from its default.
Mod Depth
Range: 0 to 200
Offsets the Depth of the modulation away from its default.
Early Reflections
- working for You
Introduction
System 6000 internally renders complex Early Reflection
patterns with much higher directional resolution than a 5.1
or 6.1 speaker set-up can discretely provide. Even though
all reflection patterns are minutely calculated and tuned, it
can be useful to scale down their complexity to integrate
the room simulation as seamlessly as possible for a given
source material.
VSS-6.1 Reverb therefore offers different means of
reducing the full patterns, making each pattern easy to
tailor for a wide range of applications.
Restrictions in Time
- Early Start and Early Stop
The Early Start and Early Stop parameters provide
adjustments of when reflections will start and when they
will end.
Front & Surround Restriction - Restrictions in Direction
Range - Front Restriction: 22, 30, 45, 90 degrees
Range - Surround Restrictions: 90, 115 degrees
By giving weight to certain directions of arrival, the user
can dramatically change the way a given reflection pattern
is perceived. In System 6000, the distinction between
incoming reflections can be controlled in a frontal, lateral
and dorsal zone as shown on the illustration above. On