Wacker Neuson BTS 630 Operator's Manual - page 23
BTS 630, 635
3 Safety
Operator's manual
23
Do not stand in the machine's swing area
Hold and guide the machine such that no body parts are in the machine's swing
area.
Securing the material
Before cutting, secure the material so that it does not slide away or tip over. Do
not ever secure the material with your foot.
Remove foreign objects before cutting
Before cutting, remove foreign objects such as nails, etc. from the cutting area.
Supporting the machine's weight
At the end of the cutting procedure the cutting blade no longer supports the
machine's weight. The operator must support the machine's weight.
While working, as a rule hold the machine on the provided handles with both
hands.
Cutting several materials at once
Do not cut several materials in one cutting procedure.
Cutting very thin materials
Make sure that very thin materials do not get trapped between the cutting blade
and the lateral protection cover.
Do not touch a rotating cutting blade
Never touch a rotating cutting blade with your hand or any other body part.
Danger of severe injury.
Running cutting blade
The cutting blade continues to run for awhile after the throttle lever is released.
Danger of injury.
Danger of fire due to sparks
Danger of fire due to hot workpiece particles flung away from the work area.
Do not work near flammable materials.
Only wear clothing made of material that is not easily flammable.
Do not leave any tools inserted
Before operating the machine, make sure that tools have been removed.