Wacker Neuson BTS 630 Operator's Manual - page 61
Other manuals for BTS 630:
Use And Operation
Manual is about: Gasoline cut-off saw
of
80
BTS 630, 635
10 Maintenance
Operator's manual
61
Attaching the covers
1. Place the clutch cover in position and tighten it with screws.
2. Place the belt guard in position and affix it with screws.
3. Rotate the adjusting screw clockwise until the square nut is flush with the
mark.
4. Tighten the belt guard screws.
Torque 25 Nm.
Item
Designation
Item
Designation
1
Screw (2 pieces)
4
Screw (3 pieces)
2
Adjusting screw
5
Clutch cover
3
Belt guard