Wacker Neuson BTS 630 Operator's Manual - page 46
Other manuals for BTS 630:
Use And Operation
Manual is about: Gasoline cut-off saw
of
80
9 Use and operation
BTS 630, 635
46
Operator's manual
4. Pull the starter rope with force, but not suddenly.
When you first hear the engine ignite, move the multifunction switch from the
"Choke" position to the "I" position.
If necessary, actuate the decompression valve once again.
5. Pull the starter rope with force, but not suddenly (several times, if necessary)
until the engine starts.
6. Let starter rope slowly roll back in.
7. Press the throttle lever to release the lock in the half-gas position.
8. Allow the engine to warm up.