Wacker Neuson BTS 630 Operator's Manual - page 38
Other manuals for BTS 630:
Use And Operation
Manual is about: Gasoline cut-off saw
of
80
8 Initial start up
BTS 630, 635
38
Operator's manual
Slackening the V-belt
1. Loosen both belt guard screws by approximately one turn.
2. Rotate the adjusting screw counter-clockwise until the V-belt is slackened
completely.
3. Unscrew the belt guard screws and remove them.
4. Remove the belt guard.
Item
Designation
Item
Designation
1
Screw (2 pieces)
3
Belt guard
2
Adjusting screw
4