Wacker Neuson BTS 630 Operator's Manual - page 53
Other manuals for BTS 630:
Use And Operation
Manual is about: Gasoline cut-off saw
of
80
BTS 630, 635
10 Maintenance
Operator's manual
53
10.3.3 Tightening the V-belt
Performing preparations
1. Switch off the engine.
Tightening the V-belt
1. Loosen both belt guard screws by approximately one turn.
2. Rotate the adjusting screw clockwise until the square nut is flush with the
mark.
3. Tighten both belt guard screws.
Torque 25 Nm.
Item
Designation
Item
Designation
1
Screw (2 pieces)
3
Square nut
2
Adjusting screw