Wacker Neuson BTS 630 Operator's Manual - page 37
Other manuals for BTS 630:
Use And Operation
Manual is about: Gasoline cut-off saw
of
80
BTS 630, 635
8 Initial start up
Operator's manual
37
Converting the protective hood
1. Unscrew both hose connections and remove them.
2. Rotate the protective hood clockwise as far as it will go.
3. Unscrew and remove the vibration dampers.
4. Rotate the protective hood counter-clockwise until the mounting hole in the
vibration damper is visible.
5. Position the vibration damper and tighten it.
6. Unscrew the adjustment handle on top and remove it.
7. Position the adjustment handle below and tighten it.
Item
Designation
1
Hose connection (2 pieces)
2
Vibration dampers
Item
Designation
1
Adjustment handle
2
Vibration dampers