Wacker Neuson BTS 630 Operator's Manual - page 64
Other manuals for BTS 630:
Use And Operation
Manual is about: Gasoline cut-off saw
of
80
10 Maintenance
BTS 630, 635
64
Operator's manual
10.3.10 Cleaning the spark arrestor
Note: Only EPA machines (in the USA and Canada) have a spark arrestor.
Cleaning the spark arrestor
1. Detach the cutting device, see chapter Initial start up, mounting the cutting
attachment on the outside.
2. Unscrew and remove the guide plate.
3. Remove the spark arrestor grid.
4. Clean the spark arrestor grid using a wire brush.
5. Mount and screw the guide plate and spark arrestor grid into position.
Torque 2 Nm.
6. Install the cutting device, see chapter Initial start up, mounting the cutting
attachment on the outside.
Item
Description
Item
Description
1
Muffler
3
Guide plate
2
Spark arrestor grid
4
Screw (2 pieces)