WEG PLC300 User Manual - page 15
Manual is about: Logic
of
76
Connectors
PLC300 | 3-3
XC3 – Encoder input, RS-232 and RS-485
Table 3.3: Function of the pins of the encoder, RS-232 and RS-485 input
Pino
Função
1
A - encoder A signal.
2
A - encoder A signal.
3
B - encoder B signal.
4
B - encoder B signal.
5
Z - encoder Z signal.
6
Z - encoder Z signal.
7
+5/12 Vdc - encoder supply.
8
0 V – encoder supply.
9
RS-232 rate.
10
RS-232 RX.
11
RS-232 GND.
12
RS-485 signal A (-).
13
RS-485 signal B (+).
14
RS-485 GND (insulated).
XC6 – CAN
Table 3.4: Function of the pins of the XC6 - CAN
Pin
Function
1
V -
2
CANL
3
SHIELD
4
CANH
5
V + (11 to 30 Vdc)
XC8 – Power Supply
Table 3.5: Function of the pins of the XC8 - Power Supply
Pin
Function
1
V+ (20 to 28 Vdc)
2
GND
3
Ground
XC4 – Ethernet
Ethernet standard connector.