WEG PLC300 User Manual - page 31
Configuration of the PLC300
PLC300 | 7-1
7 CONFIGURATION OF THE PLC300
Setup Function via HMI keyboard
In order to access the setup function via keyboard, press the
screen appears and prompts to enter a password.
[
S E T U P
]
T y p e 4 d i g P a s s w o r d .
P a s w d : _ _ _ _ ( E S C a b t )
The initial password of the setup function is ‘0000’, and can be modified after entering
the setup.
The arrows and browse through the functions of the setup.
the function to be edited.
[ - - S E T U P P L C30 0 - - ]
- - - - - - - - - - - - - - - - - - - -
> S e t C l o c k
L a n g u a g e S e l e c t i o n
7.1 SET CLOCK
When entering the screen of the adjustment of the clock, the current date and time are
shown. The cursor on the day of the month shows the item to be edited. The arrows
and browse between the fields.
By pressing
new value, you can use the numeric keyboard directly, or the arrows and .
The year can vary between 00 and 99, i.e., from 2000 to 2099.
The day of the week is calculated considering the date, and shown on the lower line.
The key returns to the initial value, with no change.
Press
If you want to abort the editing, press
Press
C l o c k A d j u s t
- - - - - - - - - - - - - - - - - - - -
2 9 / 0 9 / 0 9
1 4 : 0 6 : 5 5
T u e s d a y