WEG SCA06 User Manual - page 50
Other manuals for SCA06:
User Manual, User Manual
Manual is about: Servo Drive
of
99
6
Energizing and Start of Operation
6-4 | SCA06
6.2.1.2 Programming of the Motor to Be Used
Motor to be used in the example: SWA-56-2.5-20.
Sequence
Action / Result
Indication on the Display
1
SCA06 energized.
(search mode)
2
Press the key
until reaching parameter
P00385.
3
Press the key
. Then you enter the content of
parameter P00385.
(view mode)
4
Press the key
again. Then you enter the
edition mode of the parameter and the least
relevant digit flashes.
(modification mode)
5
Press the key
until you reach the value
corresponding to the motor SWA 56-2,5-20, in
this case, 22.
6
Press the key
. The value is saved.
Figure 6.2: Sequence to program the servomotor to be used