Summary of Nuvera 100

  • Page 1

    Finishing solutions planning guide supported printers: • xerox docutech 61xx • xerox docutech 1xx highlight color (hlc) • xerox docuprint 1xx • xerox igen3 digital production press • xerox nuvera 100 / 120 digital production system july 13, 2005 rev. E c.P. Bourg document finisher (bdfx) with option...

  • Page 2

    Xerox corporation global knowledge & language services 800 philips road bldg. 845 – 17s webster, ny 14580 copyright 2004 xerox corporation. All rights reserved. Printed in the united states of america. Please contact xerox feeding and finishing with any comments or suggestions regarding the content ...

  • Page 3

    Table of contents introduction ..........................................................................................................................................I about this guide ...................................................................................................................

  • Page 4

    Table of contents.

  • Page 5: Introduction

    C.P. Bourg document finisher (bdfx) introduction this solutions planning guide contains information on how to prepare for the installation of the c.P. Bourg document finisher (bdfx) together with: • xerox docutech 61xx • xerox docutech 1xx highlight color (hlc) • xerox docuprint 1xx • xerox igen3 di...

  • Page 6

    C.P. Bourg document finisher (bdfx) • customer agreement – contains the customer agreement form. Ii.

  • Page 7: Introduction

    Introduction this solutions planning guide contains information on how to prepare for the installation of the c.P. Bourg document finisher (bdfx) together with: • xerox docutech 61xx • xerox docutech 1xx highlight color (hlc) • xerox docuprint 1xx • xerox igen3 digital production press • xerox nuver...

  • Page 9

    C.P. Bourg document finisher (bdfx) 1. Product overview cover feeder (bcfx) booklet maker (bdfx) square edge (sqedg) the c.P. Bourg bdfx is a fully automated signature booklet maker, which produces high quality saddle stitched booklets in-line. The optional cover insertion module (bcfx) can feed pre...

  • Page 10

    C.P. Bourg document finisher (bdfx) install planning this install planning guide will help you prepare for the installation of the c.P bourg document finisher (bdfx) together with: • xerox docutech 61xx • xerox docutech 1xx highlight color (hlc) • xerox docuprint 1xx • xerox igen3 digital production...

  • Page 11

    C.P. Bourg document finisher (bdfx) power 35 inches 889 mm bourg document finisher x (bdfx) 94 inches 2391 mm 24 inches 613 mm conveyor 35 inches 889 mm 68 inches 1736 mm 36 inches 914 mm 35 inches 889 mm 139 inches 3539 mm power 35 inches 889 mm bourg document finisher x (bdfx) conveyor bsr 94 inch...

  • Page 12

    C.P. Bourg document finisher (bdfx) power 35 inches 889 mm 94 inches 2391 mm 35 inches 889 mm 24 inches 613 mm bourg document finisher x (bdfx) bcfx sqedg 68 inches 1736 mm 19.7 inches 500 mm 40.1 inches 1020 mm 35 inches 889 mm 162.8 inches 4145 mm power 35 inches 889 mm bourg document finisher x (...

  • Page 13

    C.P. Bourg document finisher (bdfx) dimensions bourg document finisher square edge module (optional) bourg cover feeder (optional,) width x depth x height 104.3” * x 24” x 71” 2650 x 739 x 1803 mm * - including conveyor 40.1” x 24.25” x 49” 1020 x 616 x 1242 mm 26.75” * x 27” x 52” 680 x 687 x 1242 ...

  • Page 14

    C.P. Bourg document finisher (bdfx) environmental requirements environment bdfx / bcfx / sqedg temperature 41 - 85 ° f (5 - 29 ° c) humidity 50 - 85% heat emission bdfx: 2560 btu / hr bcfx: 1590 btu / hr sqedg: 2400 btu / hr sound emission 72 db altitude -100 ft. (-31m) to 4,000 ft. (1,219 m) enviro...

  • Page 15

    C.P. Bourg document finisher (bdfx) floor load device uniform load point load bdfx 68 lbs / sq.Ft. (326 kg / sq. M) casters a: 4,840 lbs / sq.In. (340 kg / sq.Cm) casters b: 3,957 lbs / sq.In. (279 kg / sq.Cm) bcfx 30 lbs / sq.Ft. (148 kg / sq. M) casters: 1,053 lbs / sq.In. (75 kg / sq.Cm) sqedg mo...

  • Page 16

    C.P. Bourg document finisher (bdfx) unique features set listed below are diagrams of the various stitch positions that the bdf-x can produce. Note: the bdfx is delivered with 2 stitch heads. A third and forth stitch head must be ordered and installed with the machine to enable the 3 and 4 stitch opt...

  • Page 17

    C.P. Bourg document finisher (bdfx) 2. Xerox docutech 61xx performance specifications (dt61xx) listed below are the performance specifications for the c.P. Bourg document finisher, cover feeder and squareedge module. Stapling / folding specifications paper type / weight bdfx / sqedg : uncoated stock...

  • Page 18

    C.P. Bourg document finisher (bdfx) limitations • the bdfx can only be guaranteed to work to its maximum book thickness when feeding (8.5 x 11 / a4) paper if the paperweight is 90 gsm or less. (long grain paper with a weight above 90 gsm should be tested with the customer paper and application befor...

  • Page 19

    C.P. Bourg document finisher (bdfx) productivity guide the calculated productivity for the bdfx is based on host machine running duplex job. Set size / 8.5 x 11” (a4) 1 sheet 2 sheets 3 sheets 4 sheets 5 sheets 10 sheets 15 sheets 22 sheets booklets / hour 2700 2195 1538 1385 1037 523 338 239 set si...

  • Page 20

    C.P. Bourg document finisher (bdfx) 2-4.

  • Page 21

    C.P. Bourg document finisher (bdfx) 3. Xerox docutech 1xx highlight color (hlc) performance specifications (dt1xx hlc) listed below are the performance specifications for the c.P. Bourg document finisher, cover feeder, squareedge module and sheet rotator. Stapling / folding specifications paper type...

  • Page 22

    C.P. Bourg document finisher (bdfx) limitations • due to the height of the bypass transport on docutech 1xx hlc it is not possible to attach the bcfx without the bsr. • requires a minimum of 2 skipped pitches (3 skipped pitches with bcf), which results in low productivity with small booklets. (a3/ 1...

  • Page 23

    C.P. Bourg document finisher (bdfx) configuration guide the configuration guide contains diagrams over the various finishing solutions that are currently supported. Iot stacker bdfx bsr stacker bypass transport bcfx sqedg bdfx bsr bdfx bdfx bsr bdfx bcfx bdfx sqedg bcfx sqedg bdfx bsr bcfx sqedg bdf...

  • Page 24

    C.P. Bourg document finisher (bdfx) 3-4.

  • Page 25

    C.P. Bourg document finisher (bdfx) 4. Xerox docuprint 1xx performance specifications (dp180) listed below are the performance specifications for the c.P. Bourg document finisher, cover feeder, squareedge module and sheet rotator. Stapling / folding specifications paper type / weight bdfx / sqedg : ...

  • Page 26

    C.P. Bourg document finisher (bdfx) performance specifications (dp180 with xsis kit) stapling / folding specifications paper size bdfx: 7 x 10” – 14 x 18.5” (178 x 254 mm – 356 x 470 mm) bdfx w / bcfx in bypass mode: 8 x 10” – 12.25 x 18.5” (203 x 254 mm – 310 x 470 mm) bdfx w / bcfx feeding covers:...

  • Page 27

    C.P. Bourg document finisher (bdfx) system dependencies and prerequisites listed below are the dependencies and prerequisites for installing the bdfx, bcfx and sqedg module. • the printer must be equipped with a bypass transport to enable in-line finishing. • it is highly recommended that the printe...

  • Page 28

    C.P. Bourg document finisher (bdfx) productivity guide the calculated productivity for the bdfx is based on host machine running duplex job. Set size / 8.5 x 11” (a4) without bcfx 1 sheet 2 sheets 3 sheets 4 sheets 5 sheets 10 sheets 15 sheets 22 sheets booklets / hour 1800 1384 1090 900 782 450 320...

  • Page 29

    C.P. Bourg document finisher (bdfx) 5. Xerox igen3 digital production press performance specifications listed below are the performance specifications for the c.P. Bourg document finisher, cover feeder, squareedge module and sheet rotator. Note: for specific information on the bdfx together with the...

  • Page 30

    C.P. Bourg document finisher (bdfx) limitations • the bdfx can only be guaranteed to work to its maximum book thickness when feeding (8.5 x 11 / a4) paper if the paperweight is 90 gsm or less. (long grain paper with a weight above 90 gsm should be tested with the customer paper and application befor...

  • Page 31

    C.P. Bourg document finisher (bdfx) productivity guide the calculated productivity for the bdfx is based on host machine running duplex job. Set size / 8.5 x 11” (a4) 1 sheet 2 sheets 3 sheets 4 sheets 5 sheets 10 sheets 15 sheets 22 sheets booklets / hour 1500 1000 750 600 500 272 188 130 set size ...

  • Page 32

    C.P. Bourg document finisher (bdfx) 5-4.

  • Page 33

    C.P. Bourg document finisher (bdfx) 6. Xerox nuvera 100 / 120 digital production system performance specifications listed below are the performance specifications for the c.P. Bourg document finisher, cover feeder, squareedge module and sheet rotator. Stapling / folding specifications paper type / w...

  • Page 34

    C.P. Bourg document finisher (bdfx) limitations • a finisher transport module is required for in-line connectivity to the printer. • a slight cover feeder feed mechanism adjustment may be necessary when changing cover weights (lightweight stocks may require a more precise adjustment). • for 11” x 17...

  • Page 35

    C.P. Bourg document finisher (bdfx) configuration guide the configuration guide contains diagrams over the various finishing solutions that are currently supported. Sfm iot ftm sfm sfm iot sfm iot ins sfm sfm iot ftm ftm ins ftm ds5000 bdfx ds5000 bdfx ds5000 bdfx ds5000 bdfx ds5000 bcfx bdfx bcfx s...

  • Page 36

    C.P. Bourg document finisher (bdfx) 6-4.

  • Page 37

    C.P. Bourg document finisher (bdfx) 7. Customer agreement as a final step in the install planning you must complete the customer agreement form. Devices check off the modules that will be part of this install: • c.P. Bourg document finisher • c.P. Bourg cover feeder (optional, not with igen3) • c.P....

  • Page 38

    A).