Summary of GECON LITE PLUS
Page 1
Gecon lite plus www.Zadako.Com installation guide version 4, sw 3.1.
Page 2
2 warning: this device conforms to the stn en 55022 standard, class a. It is designed for the connection to a control panel conforming to stn em 60950 standard. Manipulation with the device in other ways than described in this guide could lead to its damage. Don’t modify the device and don’t try to ...
Page 3
3 basic information gecon lite plus is a gsm communicator that serves for data transfer through the gsm network via text messages and voice calls. Applications gecon lite plus is a universal device, it can be used for: • property protection – through the connection with the security system it can se...
Page 4
4 device description.
Page 5
5 installation gecon lite is supplied as a board with four holes for mounting. You can mount the gecon by attached special stickers or screws (screws are not included in the package). If you are placing the gecon inside of metal box, use an external antenna and place it outside the box. External ant...
Page 6
6 phone number settings: gecon plus can send reports to 4 phone numbers. Numbers are set following: t1=090311111 t2= t3= t4=65464464 to delete a number from gecon, use the command with # character instead of number. Example: setup of first phone number abcd t1=0901777555 delete of first number abcd ...
Page 7
7 additional functions these function specify or modify basic functioning of gecon lite plus gateway. Reports routing by default, all events (alarms and troubles) are reported to all numbers in address book. This setting is possible to change, that selected phone numbers (t1-4) will be only reported...
Page 8
8 texts setup: gecon lite plus sends predefined sms messages to report what type of event has occured. You can change these predefined messages that are sent by gecon. If you would like to see current texts settings, please send query sms text to phone number of gecon lite plus. Example: abcd text -...
Page 9
9 periodical test: periodical test is control mechanism to verify if the gateway is functional and connected. Test is performed by ringing to the first number in the list (t1) in defined time intervals. In case of accepting the call, gateway will close the call automatically. Periodical test is setu...
Page 10
10 gecon lite plus – on line print on-line print function is an universal interface for connection of security system control panel and gecon lite plus. This function enables monitoring of the control panel with detailed evaluation of all events based on analysis of dictionary of key words. The dict...
Page 11
11 abcd print=on w1=!Alarm# w2=arm# w3=disarm# w4=fail# t1=090xxxxxx vt1=5 example of online report from the security system: 14:25 alarm pir-hallway 14:26 disarm john smith example of practical use of this function: 1. Signalization of the alarm event with exact localization 2. Control of arming – ...
Page 12
12 gecon lite plus in control panel mode new feature of gecon lite is a functionality of a small independent control panel. You can connect dallas key reader supporting up to 8 keys that serve for arming and disarming. Control panel also contains buzzer and control led diodes. The connection scheme ...
Page 13
13 turning off the „control panel mode“ to turn off the control panel mode and return to caller mode, send sms command in following form: ibut=off note: programmed dallas keys will remain in the memory, the memory for the numbers is same for the caller and control panel mode. To delete and program d...
Page 14
14 setting of timer of external siren this setting is done by commands abcd alarm=30 this command will cause the siren to sound for 30 seconds. Allowed range is from 0 to 240 seconds. 0 will disable the siren during the alarm event. Note: commands alarm and ibut=on will cancel previous settings of r...
Page 15
15 arming – disarming by sms command: arming and disarming can be also performed by sms command in form abcd arm and abcd disarm. Detection of validity and value of credit on the prepaid sim cards via sms: this command will return validity of sim card and remaining credit on prepaid sim cards abcd c...
Page 16
16 factory reset: − this function will reset the device to factory setting. It is recommended to perform the reset before every installation to rule out the chance of previously applied settings. Procedure: 1. Disconnect gecon lite plus from power supply, 2. Put on jumper res, 3. Connect power suppl...