Zadako GECON LITE PLUS Installation Manual - page 10
10
GECON LITE PLUS – On line print
On-line print function is an universal interface for connection of security system control panel and Gecon lite plus.
This function enables monitoring of the control panel with detailed evaluation of all events based on analysis of
dictionary of key words. The dictionary defines, on which key words will Gecon lite plus react. If the word is present
in the dictionary, standard reaction is sending a SMS message that contains the key word.
On line print is mapped as input number 5. It is set by vt1 to vt4 command (see section report routing).
Additional option is to define priority message, which will cause not only SMS message to be sent, but also voice
dial to alert customer. The key word starts with ! character.
In special case you might need to cancel sending of message that would have been otherwise sent. To cancel
sending the message, put $ character before the keyword.
For example, you do not need to report about disarming if done by particular person (code)
Message sent from the control panel: 10:45 disarm code 45
With W1=disarm command active, Gecon lite would by default send all messages containing word disarm to SMS.
However when $ character is in front of the keyword, such keyword would cancel sending of the message. As the
result the report would not be sent.
Configuration SMS example for cancel function.
abcd print=on W1=disarm# W2=$code 45#
To activate online print function, use following command: print=on
To deactivate online print function: print=off
You can set the key words by SMS commands w1 - w16. Each key word has to be ended with character #.
Maximum length of each key word is 15 characters. You can also set the keywords via PC program in ON-LINE
section.
GECON LITE PLUS is not case sensitive.
Commands for SMS settings:
w1 .. w16
- setting of key words
print=on
- activation of the function
print=off
- deactivation of the function
BAUD=1200
- speed of serial port
Allowed speeds are: 1200, 2400, 4800, 9600, 19200
Example :
Use of Online print function of the purpose of control of arming and disarming of security system
Security system sends messages ARM and DISARM during the arming and disarming process, ALARM at the
alarm event and at the malfunctions and power supply outage.
Settings: