Zebra Rw 220 User Manual - page 25

25

RW Series User Guide

Display Functions Not Accessible from the Keypad

1

Function 

Default setting 

Scroll & Select Options

WLAN ID

2

Factory Set 

  N/A

Value

Tear-off 

00 

•  Increase (max. = +10)

  Position (Top of Form) 

•  Decrease (min. = -120

•  All protocols On

  Network & RF Settings 

•  Protocols On or Off    

  individually

Bridge Mode 

Off 

•  Off

•  On

  DTR/VBUS-Power Off 

Off 

•  On

•  Off

Present-at 

000 

•  Increase (max.= +120)

•  Decrease (min. = 000

  Displays current

  Bluetooth parameters 

n/a 

  Bluetooth operating    

  parameters

  Displays current  

802.11b WLAN parameters

n/a 

  802.11b operating

  parameters

Media Type 

Journal 

•  Journal

•  Label

Smart Card or 

•  Off

MSR Card 

Off 

•  Display “RDR”

Reader Status

3

NOTES:

1  The  parameters in this table  will appear on the display but can be set only by using  a PC running 

Zebra’s Label Vista label creation program and a data cable link to the printer.

2.  Can  be adjusted from the factory default using  a PC running Zebra’s Label Vista label creation program 

and a data cable link to the printer.

3.  Card reader status is under application control, and is not user selectable. 

.