Zebra Rw 220 User Manual - page 48

48

RW Series User Guide

•  Remove the Docking Connector Cover from the bottom 

of the printer, and retain it for future use. (Refer to Figure 

22.)  

•  Place the bottom of the printer over the two pins in the  

Cradle.  

•  Rock the top of the Printer into the  Cradle and press firm-

ly until it latches in place.  

•  Ensure the Cradle power and charge indicators are lit and 

turn the printer on.

   If the charge indicator does not light up, unlatch the printer from the 

Vehicle Cradle, lift it clear from the Cradle and re-seat it.

Refer to the Vehicle Cradle Installation Guide for more complete 

information on the power and charge indicators

You can load media (including media from an external sup-

ply) and perform cleaning operations normally when the 

RW 420 Printer is installed in the Cradle .